Skip to the content
2 layers88.9 × 88.9 mmDipext pin, the printed circuit board in 3D

Socket extension cable adapters

Size
88.9 × 88.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
80
Pads
244
Tracks, vias
200, 0
Routed
Yes
KiCad
KiCad 5 (file 20210824)
Created
15 Aug 2018
Updated
28 Jan 2022

Overview

Dipext pin is an open-source printed circuit board by JohnDMcMaster, from the JohnDMcMaster/sockpcb repository on GitHub. It is a 2-layer board of 88.9 × 88.9 mm with 12 parts on 80 nets, routed with 200 tracks and 0 vias.

It belongs with the interfaces and adapters boards of this library.

README

README.md

sockext

Chip socket extension cable adapters. They are primarily intended to be high quality fixtures for invasive chip analysis such as microprobing, laser fault injection, and EM SCA.

Example: BP Microsystems programmers are high quality but physically large. Unfortunately this large size precludes it from being used to read out a chip on my probe station. Solution: extend the socket from the programmer via ribbon cable to an adapter board on the probe station (dipext-pin + dipext-sock + cable).

Projects:

  • dipext-sock: converts an IDC connector to a ZIF40 socket. Also adds patch connections
  • dipext-pin: converts DIP40 pins into an IDC connector. Also adds patch connections
  • dipext-pin-r: like above but flips pins for backside analysis
    • WARNING: not updated for new pin order
  • dipspy: patch a chip similar to dipext-sock + dipext-pin w/o cables and such
    • FIXME: needs rev to use SMD to make solder easier

IMPORTANT: pin order was swapped at this rev to match crimp connectors:

  • dipext-sock_r3
  • dipext-pin_r6
  • WARNING: dipext-pin-r_r1 is not compatible / updated yet

Parts

12
QtyValueFootprintReferences
401x20Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_VerticalJ5, J6, J7, J8
4Mounting_HoleMounting_Holes:MountingHole_8.4mm_M8MK1, MK4, MK9, MK12
2Conn_02x20_Odd_EvenPin_Headers:Pin_Header_Straight_2x20_Pitch2.54mmJ3, J4
1IDC40Connectors_IDC:IDC-Header_2x20_Pitch2.54mm_StraightJ2
1ZIFlib:aries_40-6554-10_DIP-40_W15.24mm_ZIFJ1

More from JohnDMcMaster/sockpcb

5
  • 2 layers112 × 137.4 mmSimpleprobecard, the printed circuit board in 3D

    Simpleprobecard

    JohnDMcMaster/sockpcb

    Socket extension cable adapters

    77 parts1
  • 2 layers88.9 × 88.9 mmDipext pin r4, the printed circuit board in 3D

    Dipext pin r4

    JohnDMcMaster/sockpcb

    Socket extension cable adapters

    16 parts1
  • 2 layers88.9 × 88.9 mmDipext pin r r1, the printed circuit board in 3D

    Dipext pin r r1

    JohnDMcMaster/sockpcb

    Socket extension cable adapters

    14 parts1
  • 2 layers74.5 × 72 mmDipext pin, the printed circuit board in 3D

    Dipext pin

    JohnDMcMaster/sockpcb

    Socket extension cable adapters

    9 parts1
  • 2 layers63.8 × 68.3 mmDipext pin, the printed circuit board in 3D

    Dipext pin

    JohnDMcMaster/sockpcb

    Socket extension cable adapters

    8 parts1

Similar boards

  • 2 layersNrf bga, the printed circuit board in 3D

    Nrf bga

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    12 parts14kMIT
  • 2 layers66.9 × 74.5 mmDeskHop, the printed circuit board in 3D

    DeskHop

    hrvach/deskhop

    Fast Desktop Switching Device

    12 parts7.9kGPL-3.0
  • 2 layers40 × 15 mmSensors, the printed circuit board in 3D

    Sensors

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    12 parts3kApache-2.0
  • 2 layers42.7 × 56.5 mmTle6240 driver, the printed circuit board in 3D

    Tle6240 driver

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k
  • 2 layers49 × 25 mm5v boost regulator, the printed circuit board in 3D

    5v boost regulator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    12 parts915
  • 2 layers28.3 × 10.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    12 parts716GPL-3.0
  • 2 layers25.4 × 70.4 mmTpmsniffer, the printed circuit board in 3D

    Tpmsniffer

    stacksmashing/pico-tpmsniffer

    A simple, very experimental TPM sniffer for LPC bus

    12 parts696

Questions

How big is the Dipext pin PCB?

It measures 88.9 × 88.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Dipext pin use?

12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dipext pin KiCad files?

From the JohnDMcMaster/sockpcb repository on GitHub, at the commit this page was made from: the board is dipext-pin_r6/dipext-pin.kicad_pcb and its schematic dipext-pin_r5/dipext-pin_r4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dipext pin design in my own project?

Its repository states no licence, so its author keeps all rights: ask JohnDMcMaster before reusing the design.