4 layers126.6 × 37.7 mm
Gruzik2.0
NYDEREK/LineFollower_GRUZIK2.0-light
GRUZIK2.0 is simple light construction made for "line follower light" competition
50 parts101MIT
4 layers50 × 64.5 mm
PCB Glove
JohnanLuca02/RoboticArmProjectRepo for my robotic arm project, to share my PCBs and codes
- Size
- 50 × 64.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 44
- Pads
- 72
- Tracks, vias
- 67, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 16 Dec 2025
- Updated
- 16 Dec 2025
Overview
PCB Glove is an open-source printed circuit board by JohnanLuca02, from the JohnanLuca02/RoboticArmProject repository on GitHub. It is a 4-layer board of 50 × 64.5 mm with 12 parts on 44 nets, routed with 67 tracks and 0 vias.
It is built around the HC-05. Its parts include 5 connectors, 3 resistors and 3 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdRoboticArmProject
Repo for my robotic arm project, to share my PCBs and codes
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | SW_SPST | Button_Switch_THT:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW1, SW2, SW3 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | MPU-9250/6500 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J2, J4 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | Arduino_Nano_Every | Module:Arduino_Nano | A1 |
| 1 | External_source | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J6 |
| 1 | FlexSensor_JST | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J5 |
| 1 | HC-05 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J1 |
Questions
How big is the PCB Glove PCB?
It measures 50 × 64.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the PCB Glove use?
12 parts, built around the HC-05. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB Glove KiCad files?
From the JohnanLuca02/RoboticArmProject repository on GitHub, at the commit this page was made from: the board is PCB_Glove.kicad_pcb and its schematic PCB_Glove.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB Glove design in my own project?
Its repository states no licence, so its author keeps all rights: ask JohnanLuca02 before reusing the design.
Similar boards
- 2 layers100 × 100 mm
- 2 layers90.9 × 38.4 mm
Snaaur v1
duongngochoan/Self_balancing_robot_PID
Used a PID control algorithm and MPU605 sensor to balance a two-wheeled robot.
58 parts7 - 2 layers56.8 × 68.6 mm
Emg
leikoilja/muscle-imbalance-detection
A device to assist patients with the rehabilitation of the knee joint after a knee surgery using EMG biofeedback. The device can reliably detect muscle activity and display it in an easy-to-use mobile application.
84 parts6MIT - 2 layers135.8 × 56.1 mm
Power board
xtarke/automated_buggy
This shield connects microcontroller (MSP-EXP430FR2355) pins to the car's power board. Go to Power Board for more hardware information.
87 parts5GPL-3.0 - 2 layers33 × 58.8 mm
- 4 layers160 × 117.5 mm
- 2 layers
