
8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

6502 PCB is an open-source printed circuit board by joerhang1365, from the joerhang1365/6502_PCB repository on GitHub. It is a 2-layer board of 114.3 × 88.9 mm with 24 parts on 63 nets, routed with 573 tracks and 21 vias.
It is built around the 74HC00D. Its parts include 5 ICs, 5 connectors, 4 capacitors, 3 resistors and 1 diode. It belongs with the retro computing and games boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4 |
| 3 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 2 | Conn_01x16_Pin | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J2, J4 |
| 1 | 1MHz | Oscillator:Oscillator_DIP-14 | X1 |
| 1 | 28C256 | Package_DIP:DIP-28_W15.24mm | U3 |
| 1 | 62256 | Package_DIP:DIP-28_W15.24mm | U4 |
| 1 | 74HC00 | Package_DIP:DIP-14_W7.62mm | U2 |
| 1 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J5 |
| 1 | LED | LED_THT:LED_D5.0mm_Clear | D1 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | W65C02S | Package_DIP:DIP-40_W15.24mm | U1 |
| 1 | WD65C22 | Package_DIP:DIP-40_W15.24mm | U5 |
The 20 most common of 24 parts.

slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed


Kris-Sekula/EPROM-EMU-NG
EPROM Emulator Project with Arduino


tebl/BE6502-Build-a-65c02-computer
A PCB being made while watching Ben Eaters "Build a 6502 computer" video series. Includes the computer itself, a standalone slow clock and an Arduino Mega shield for the bus monitor sketch..

slu4coder/Minimal-64-Home-Computer
Legacy: Full TTL-only home computer with VGA and PS/2 and twice the processing power of a Commodore 64

It measures 114.3 × 88.9 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the 74HC00D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the joerhang1365/6502_PCB repository on GitHub, at the commit this page was made from: the board is 6502 PCB.kicad_pcb and its schematic 6502 PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask joerhang1365 before reusing the design.