

PCB created for Hack Club Solder
- Size
- 295.5 × 295.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 8
- Pads
- 48
- Tracks, vias
- 118, 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 May 2025
- Updated
- 5 May 2025
Overview
Solder is an open-source printed circuit board by JoelBiswas, from the JoelBiswas/MasterSwordPCB repository on GitHub. It is a 2-layer board of 295.5 × 295.3 mm with 13 parts on 8 nets, routed with 118 tracks and 5 vias.
Its parts include 5 resistors, 2 transistors, 1 capacitor and 1 switch.
README
README.mdMasterSwordPCB
PCB created for Hack Club Solder
Slack Username: Joel Biswas
The PCB is in the shape of a master sword. The button acts as a toggle on/off switch. When the system is on, the potentiometer controls the vibration strength of a motor near the top of the sword. The circuit uses a transistor-based latch design to allow the button to act as a toggle.
Bill of Materials: Resistor (68k) - 1 Resistor (15k) - 1 Resistor (680) - 1 Resistor (330k) - 1 Resistor (470k) - 1 2N3904 transistor (NPN Type) - 2 Mini Motor Disc - 1 6mm Push Button - 1 Potentiometer - 1 CR2032 battery cell - 1
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 1 | 15k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 330k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 470k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 680 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 68k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_3034_1x20mm | BT1 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1 |
| 1 | LOGO | LOGO | G*** |
| 1 | Motor_DC | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | M1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Vishay_T73YP_Vertical | RV1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
Similar boards
- 2 layers40 × 20 mm

- 2 layers74.9 × 49.5 mm

- 2 layers35 × 29 mm

MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm

AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm

- 2 layers95 × 95 mm

Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm

Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0
Questions
How big is the Solder PCB?
It measures 295.5 × 295.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Solder use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Solder KiCad files?
From the JoelBiswas/MasterSwordPCB repository on GitHub, at the commit this page was made from: the board is Solder/Solder.kicad_pcb and its schematic Solder/Solder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Solder design in my own project?
Its repository states no licence, so its author keeps all rights: ask JoelBiswas before reusing the design.