
MetodAdapter12V
Jochen0x90h/LedStrip
Receiver and voltage regulator for LED strips based on WS2812 or equivalent

Receiver and voltage regulator for LED strips based on WS2812 or equivalent
Receiver is an open-source printed circuit board by Jochen0x90h, from the Jochen0x90h/LedStrip repository on GitHub, published under the MIT licence. It is a 2-layer board of 20 × 16 mm with 7 parts on 6 nets, routed with 96 tracks and 11 vias.
It is built around the SP485CN-L. Its parts include 4 connectors, 1 capacitor, 1 resistor and 1 IC. It belongs with the lEDs and displays boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100n | local:0603 | C1 |
| 1 | 120R | local:1206 | R1 |
| 1 | Conn_01x05_Socket | local:HolesL | J3 |
| 1 | Kyocera-009176002001906 | local:Kyocera-009176002001906 | J4 |
| 1 | SP485CN | local:SO-8 | U1 |
| 1 | WAGO 2061-602 | local:WAGO2061-602 | J1 |
| 1 | har-flexicon 2,54 MSH-4 | local:Harting14110413002000 | J2 |

Jochen0x90h/LedStrip
Receiver and voltage regulator for LED strips based on WS2812 or equivalent

Jochen0x90h/LedStrip
Receiver and voltage regulator for LED strips based on WS2812 or equivalent

Jochen0x90h/LedStrip
Receiver and voltage regulator for LED strips based on WS2812 or equivalent

Jochen0x90h/LedStrip
Receiver and voltage regulator for LED strips based on WS2812 or equivalent

Jochen0x90h/LedStrip
Receiver and voltage regulator for LED strips based on WS2812 or equivalent

microchip-pic-avr-examples/pic16f56q71-audio-light-show-mplab-mcc
An audio-reactive light show driven by the Q71's analog and DMX capabilities.

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 20 × 16 mm and has 2 copper layers, 1.6 mm thick.
7 parts, built around the SP485CN-L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Jochen0x90h/LedStrip repository on GitHub, at the commit this page was made from: the board is pcb/supplyAndReceiver5Vold/receiver.kicad_pcb and its schematic pcb/Adapter5V/Adapter5V.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).