2 layers64 × 39.5 mm
Control
Jochen0x90h/LedControl
Controller for LED strips based on WS2812 with display based on SSD1306
67 partsMIT
2 layers60 × 26 mm
Control
Jochen0x90h/LedControlController for LED strips based on WS2812 with display based on SSD1306
- Size
- 60 × 26 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 66
- Pads
- 207
- Tracks, vias
- 529, 48
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Dec 2023
- Updated
- 9 Oct 2026
Overview
Control is an open-source printed circuit board by Jochen0x90h, from the Jochen0x90h/LedControl repository on GitHub, published under the MIT licence. It is a 2-layer board of 60 × 26 mm with 29 parts on 66 nets, routed with 529 tracks and 48 vias.
It is built around the SP3485CN-L, TPS82130SIL and BME680, with the FTSH-107-01-L-DV-K, IM69D120V01 and PMEG6010ELRX among its other parts. Its parts include 9 capacitors, 7 connectors, 4 ICs, 3 resistors and 2 diodes. It belongs with the lEDs and displays boards and the STM32 boards of this library.
Main components
6
SP3485CN-L
SOIC-80℃~+70℃ 1 1 10Mbps 3V~3.6V Transceiver SOIC-8 RS-485 / RS-422 ICs ROHSMaxLinearRS-485 / RS-422 ICs
TPS82130SIL
3V to 17V Input 3A Step-Down Converter MicroSiP™ Module with Integrated InductorTexas InstrumentsUncategorised
BME680
LGA-8-40℃~+85℃ 0.12hpa 0.6hpa 1.3pa/K 1.71V~3.6V 150nA 30Kpa~1.1bar I2C、SPI Temperature Sensor LGA-8 Pressure Sensors ROHSBosch SensortecPressure Sensors
FTSH-107-01-L-DV-K
SMD,P=1.27mm-55℃~+125℃ 1.27mm 14P 2 2x7P 3.05mm 3.4A Black Gold Phosphor bronze Pin Header Surface Mount,Vertical SMD,P=1.27mm Pin Headers ROHSSamtecPin Headers
IM69D120V01
--26dB 1.3mA 1.62V~3.6V Omnidirectional - MEMS Microphones ROHSInfineon TechnologiesMEMS Microphones
PMEG6010ELRX
SOD-123W1A 605mV@1A 60V 90nA@60V Independent SOD-123W Schottky Diodes ROHSNexperiaSchottky Diodes
README
README.mdLED Control
Control unit for LED strips
Features
- 128x64 OLED Display
- Support for presets, i.e. the same effect can be configured with different parameters in the preset list
Compile
See README.md of coco base library
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric | C4, C5, C10, C11, C12 |
| 2 | 10u/16V | Capacitor_SMD:C_1206_3216Metric | C1, C3 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 22u/6V3 | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 900k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | BME680 | local:BME680 | U3 |
| 1 | D_Photo | local:PhotoDiode | D1 |
| 1 | FTSH-107-01-L-DV-K | local:PinHeader-2x7-1.27mm-smd | P1 |
| 1 | IM69D120 | Sensor_Audio:Infineon_PG-LLGA-5-1 | MK1 |
| 1 | Jumper_2_Open | local:Jumper | JP1 |
| 1 | PMEG6010ELR | local:PMEG6010ELR | D4 |
| 1 | RotaryEncoder_Switch | local:PEC12R-4217F-S0024 | SW1 |
| 1 | SP3485CN | local:SO-8 | U4 |
| 1 | ST-Link | local:ProgPads | P2 |
| 1 | STM32G431CBUx | local:STM32G431CBU | U1 |
| 1 | TPS82130 | local:TPS82130 | U2 |
| 1 | Term | local:Termination | J4 |
| 1 | UG-2864ASWPG01 | local:Connector-Flat-24-0.5mm | P3 |
| 1 | USB_C_Receptacle_USB2.0 | local:USB4510-03-1-A | J1 |
| 1 | WAGO2061-602 | local:WAGO2061-602 | P5 |
| 1 | har-flexicon 2,54 MSH-4 | local:Harting14110413002000 | P4 |
The 28 most common of 29 parts.
Questions
How big is the Control PCB?
It measures 60 × 26 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Control use?
29 parts, built around the SP3485CN-L, TPS82130SIL, BME680 and FTSH-107-01-L-DV-K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Control KiCad files?
From the Jochen0x90h/LedControl repository on GitHub, at the commit this page was made from: the board is pcb/g431/control.kicad_pcb and its schematic pcb/g431/control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Control design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from Jochen0x90h/LedControl
1Similar boards
- 4 layers43 × 43 mm
- 2 layers70 × 76 mm
Control
Jochen0x90h/RoomControl
Smart home room controller based on nRF52840 with MQTT and and IEEE 802.15.4 radio support. Buttons and relays for lights and roller shutters can also be connected with a local bus using LIN physical layer
79 parts3 - 4 layers88.9 × 79.4 mm
Link
oats-center/avena-rs
Avena On The Road: Bringing pavement health data to your fingertips
170 parts3 - 4 layers40 × 75 mm
CUR flight computer 25-26
CU-Rocketry/flight_computer
Competition Flight Computer Module 25-26
169 parts1 - 4 layers
BLDCM Power
brenocq/bldc-motor
High-precision BLDC motor and controller development from scratch (in progress...)
60 parts13MIT - 6 layers46 × 46 mm
TritonECU MCU
alpauna/TritonECU
ESP32-S3 engine control unit — fuel injection, ignition timing, wideband O2 (CJ125/LSU 4.9), dashboard, and MQTT telemetry
38 parts10 - 4 layers80 × 54 mm
- 2 layers81.5 × 79.5 mm
Aestheticreal
ViratS-best/Aesthetiocizer
Xiao car AI project: firmware inference, embedded model assets, and hardware design.
34 parts1