Skip to the content
2 layers58.4 × 99.8 mmVGA2NTSCv11-jnftech, the printed circuit board in 3D

VGA2NTSCv11-jnftech

jnftech/vga2ntsc-kicad30

VGA2NTSC KiCad Conversion/Modification

Size
58.4 × 99.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
72
Nets
69
Pads
211
Tracks, vias
289, 51
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
20 Apr 2020
Updated
4 May 2025

Overview

VGA2NTSCv11-jnftech is an open-source printed circuit board by jnftech, from the jnftech/vga2ntsc-kicad repository on GitHub. It is a 2-layer board of 58.4 × 99.8 mm with 72 parts on 69 nets, routed with 289 tracks and 51 vias.

It is built around the MD-40SM. Its parts include 25 capacitors, 16 resistors, 12 connectors, 3 ICs and 2 fuses.

Main components

1

README

_Old Version (20200420)/README.md

RetroTINK VGA2NTSC - KiCad Conversion/Modification

This is a modified version of Mike Chi's VGA2NTSC v1.1. The first goal was to convert the original Altium source files to KiCad - a free and open source tool - as not everyone has access to Altium. Secondly, most footprints have been swapped to make the board more DIY friendly - for example swapping 0402 components (difficult to solder by hand) with 0805 or larger.

Goals:

  • Convert original Altium project to KiCad
  • Use 0805 footprints instead of smaller packages
  • Keep location of jacks and mounting holes in the same locations
  • Keep circuit identical to original schematics
  • Adjust vertical board size slightly to fit within 100x100mm size limit for cheap boards with many popular PCB fabs
  • Add a footprint for a DC barrel jack instead of USB power (either-or can be used in the same spot). Warning has been added to the board denoting 5V power only
  • Modified power distribution rail using bottom layer of board
  • Relocated clock section to minimize routing near other signals or underneath video amp
  • Minimized the use of vias for signal traces where possible.
  • More KiCad practice for me
  • Finally try to publish something on GitHub (first repo!)

Todo:

  • Tidy up board outline. Kicad doesnt play well with Edge.Cuts in footprints when they overlap the board outline, so the circular drills used on the SCART and RCJ-4xx footprints are a workaround.
  • Add selectable HV/CSYNC switch
  • Add additional clock circuit and switch for PAL mode
  • Look for other improvements based on AD725 datasheet information
  • (Maybe) version with SCART and/or XRGB-style 8-pin MiniDIN Input

Some of these tweaks are on a test version that is being fabbed by JLCPCB now.

Notes:

  • The board design uses vias-in-pads. This can be a problem for some fabs. JLCPCB (at least with default HASL plating) and OSHpark dont seem to have an issue with this, but some fabs might depending on how they plate the pads. You may need to adjust the locations of the vias and add a couple traces to compensate, should you run into this situation.

Tools used for conversion:



This derivative work maintains the same source license as the original board. https://www.retrotink.com/post/vga2ntsc-released

“Mike Chi” License:

(From https://www.retrotink.com/post/vga2ntsc-released)

text
License
The materials are released under the terms below. I don't have time for pedantic nonsense or legal theory and like to keep things simple. I call this the 'Mike Chi' license.

- For each project, at my sole discretion, I may release whatever sources, to whatever level of abstraction, that I deem appropriate. Additional information/materials may be released on a scheduled determined at my sole discretion.
- You may modify, use or adapt any or all portions of the released material for any purpose you wish, including sale.
- The exception is that the files may not be used for commercial activities by entities, determined at my sole discretion, that have a history of violating intellectual property rights or licenses.
- If these materials were helpful and/or of use to you, I only ask that you provide some form of acknowledgment that you feel is fair.
- I'd also love to hear about how you're using it!
- If you re-distribute the material in a substantially unaltered form, please include this notice.
- NO WARRANTY EXPRESSED OR IMPLIED. WE TAKE ABSOLUTELY NO RESPONSIBILITY FOR WHAT MAY OCCUR FROM USAGE OF THE FILES.
- WE CANNOT AND WILL NOT OFFER ANY SUPPORT FOR THE USAGE OF THE FILES. IF YOU DO NOT AGREE WITH THESE TERMS THEN DO NOT USE ANY OF THE MATERIALS AND DON'T COMPLAIN.

https://www.retrotink.com/

Parts

72
QtyValueFootprintReferences
110.1uFVGA2NTSC:R_0805_1mmC1, C2, C3, C4, C5, C7, C8, C10, C11, C12, C16
1075VGA2NTSC:R_0805_1mmR1, R2, R3, R4, R5, R6, R7, R8, R9, R10
7Cap 220uf Case CVGA2NTSC:CP_Tantalum_Case-C_EIA-6032-28_JFTC6, C9, C21, C22, C23, C24, C25
347pFVGA2NTSC:R_0805_1mmC18, C19, C20
210ufVGA2NTSC:R_0805_1mmC13, C14
21KVGA2NTSC:R_0805_1mmR11, R13
249R9VGA2NTSC:R_0805_1mmR15, R16
2Jumper_NO_SmallVGA2NTSC:WirepadJumperSmJP1, JP2
2LOGOVGA2NTSC:JFTLOGO-1x1.3mmG***, G***
110uFVGA2NTSC:R_0805_1mmC15
118pFVGA2NTSC:R_0805_1mmC17
11MVGA2NTSC:R_0805_1mmR12
14.7kVGA2NTSC:R_0805_1mmR14
1Barrel_Jack_SwitchVGA2NTSC:BARREL_JACK-JFTJa7
1EXT_CLOCKVGA2NTSC:TH_Hole_One_1mmP1
1EXT_STD_TOGGLEVGA2NTSC:Pin_Header_Straight_1x03_Pitch2.54mm_NoSilkP2
1EncoderVGA2NTSC:SOIC-16W_7.5x10.3mm_Pitch1.27mm_HSU2
1Ferrite BeadVGA2NTSC:R_0805_1mmF1
1GND_TAPVGA2NTSC:TH_Hole_One_1mmP5
1LOGOVGA2NTSC:Logo_RetroTink_VGA2NTSCG***
1LOGOVGA2NTSC:Logo_15khzNegativeSyncOnlyG***
1MD-40SMVGA2NTSC:CUI_MD-40SM_VGA2NTSCJ3
1Micro USBVGA2NTSC:Connector_MicroUSB_Amp10118194-0001LFJ7
1OSC/DIVVGA2NTSC:SOIC-8_3.9x4.9mm_Pitch1.27mm-JFTU3
1PTC 500mAVGA2NTSC:R_1812_1206-JFTF2
1RCA RedVGA2NTSC:RCJ-04x_NoHoleJ6
1RCA WhiteVGA2NTSC:RCJ-04x_NoHoleJ5
1RCA YellowVGA2NTSC:RCJ-04x_NoHoleJ1
1SCART FemaleVGA2NTSC:SCART-F-RA-NoHoleJ4
1SW_SPDTVGA2NTSC:SW_HRO-SK-12D02_SPDT_AngledSW1
1VCC_TAPVGA2NTSC:TH_Hole_One_1mmP4
1Video BufferVGA2NTSC:TSSOP-14_4.4x5mm_Pitch0.65mm-JFTU1
1XTALVGA2NTSC:Crystal_4SMD-NL_3.2mmx2.5mm_HandSolderX1
1YTRAP_FEEDVGA2NTSC:TH_Hole_One_1mmP3
1~VGA2NTSC:AMPHENOL_L77HDE15SD1CH4F_Drill1SizeOvalJ2

The 67 most common of 72 parts.

More from jnftech/vga2ntsc-kicad

1
  • 2 layers58.4 × 99.8 mmVGA2NTSCv11-jnftech, the printed circuit board in 3D

    VGA2NTSCv11-jnftech

    jnftech/vga2ntsc-kicad

    VGA2NTSC KiCad Conversion/Modification

    57 parts30

Similar boards

  • 2 layers169.6 × 229.8 mmDragonATXProto, the printed circuit board in 3D

    DragonATXProto

    jimbro1000/DragonATXProto

    Prototyping special for rev x4 in ATX format

    102 parts
  • 2 layers21.5 × 37 mmAdbee, the printed circuit board in 3D

    Adbee

    TheCodedKid/adbee

    ESP32 based Apple Device Bus to USB Converter

    8 parts
  • 4 layers76.3 × 88.1 mmLegacy av in, the printed circuit board in 3D

    Legacy av in

    marqs85/ossc_pro_hw

    OSSC Pro HW files

    92 parts31CERN-OHL-P-2.0
  • 2 layers50 × 90 mmHackholidays, the printed circuit board in 3D

    Hackholidays

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    72 parts915
  • 2 layers59.9 × 82.5 mmCentronics 50Pin, the printed circuit board in 3D

    Centronics 50Pin

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    72 parts459GPL-3.0
  • 2 layers45.7 × 168.3 mmSPIN RCV PANEL, the printed circuit board in 3D

    SPIN RCV PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    72 parts431
  • 2 layers152.4 × 101.6 mm8088-FE2010A SBC, the printed circuit board in 3D

    8088-FE2010A SBC

    skiselev/micro_8088

    Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset

    72 parts412GPL-3.0
  • 2 layers80.8 × 50.8 mmProbeSenseNumbers, the printed circuit board in 3D

    ProbeSenseNumbers

    Architeuthis-Flux/JumperlessV5

    The next generation jumperless breadboard

    72 parts332

Questions

How big is the VGA2NTSCv11-jnftech PCB?

It measures 58.4 × 99.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the VGA2NTSCv11-jnftech use?

72 parts, built around the MD-40SM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the VGA2NTSCv11-jnftech KiCad files?

From the jnftech/vga2ntsc-kicad repository on GitHub, at the commit this page was made from: the board is VGA2NTSCv11-jnftech.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the VGA2NTSCv11-jnftech design in my own project?

Its repository states no licence, so its author keeps all rights: ask jnftech before reusing the design.