
Anchor7
jmpinit/babel-hardware
PCBs for the Babel in Reverse art installation under the Manhattan Bridge

PCBs for the Babel in Reverse art installation under the Manhattan Bridge
Anchor7 LEDs is an open-source printed circuit board by jmpinit, from the jmpinit/babel-hardware repository on GitHub. It is a 2-layer board of 79 × 32.8 mm with 13 parts on 13 nets, routed with 43 tracks and 2 vias.
Its parts include 5 diodes, 2 resistors, 2 connectors, 1 capacitor and 1 IC.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | LED | LED_SMD:LED_PLCC_2835_Handsoldering | D1, D2, D3, D4, D5 |
| 2 | Conn_01x03_Female | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J2 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 100uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | AL5809 | Diode_SMD:D_PowerDI-123 | U1 |
| 1 | MountingHole | MountingHole:MountingHole_3.5mm | H1 |
| 1 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-723 | Q1 |

jmpinit/babel-hardware
PCBs for the Babel in Reverse art installation under the Manhattan Bridge

jmpinit/babel-hardware
PCBs for the Babel in Reverse art installation under the Manhattan Bridge



samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments


willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 79 × 32.8 mm and has 2 copper layers, 1.6 mm thick.
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jmpinit/babel-hardware repository on GitHub, at the commit this page was made from: the board is Anchor7_LEDs/Anchor7_LEDs.kicad_pcb and its schematic Anchor7/Anchor7.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jmpinit before reusing the design.