4 layers91.3 × 53.5 mm
Ssd2828 board
dartcom/ssd2828-dev
A carrier board for the ssd2828 and the LH154Q01 & VS035ZSM lcd panels
144 parts23
2 layers49.5 × 50.3 mm
Sharp dsi
jlywxy/project-display16Mobile Display Test & Debug
- Size
- 49.5 × 50.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 96
- Pads
- 284
- Tracks, vias
- 1,101, 105
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 9 Apr 2023
- Updated
- 9 Apr 2023
Overview
Sharp dsi is an open-source printed circuit board by jlywxy, from the jlywxy/project-display repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 49.5 × 50.3 mm with 52 parts on 96 nets, routed with 1,101 tracks and 105 vias.
It is built around the ICL7660N, AMS1117 and SSD2828QN4, with the AYF333135A among its other parts. Its parts include 21 capacitors, 12 resistors, 6 ICs, 6 diodes and 6 connectors. It belongs with the lEDs and displays boards and the STM32 boards of this library.
Main components
4
ICL7660N
DIP-83V~9.5V DIP-8 Charge Pumps ROHSHGSEMIDC-DC Converters
AMS1117
1.0 A Low-Dropout Fixed RegulatorAdvanced Monolithic SystemsUncategorisedSSD2828QN4
QFN-68-EP(8x8)UncategorisedSolomon SystechAYF333135A
P=0.3mm-55℃~+85℃ 0.2mm 0.3mm 0.88mm 31P Copper Alloy Gold P=0.3mm FFC, FPC (Flat Flexible) Connector Assemblies ROHSPanasonicFFC, FPC (Flat Flexible) Connector Assemblies
README
readme.mdProject Display
This is the repo sharing some of the mobile display information and their debugging method.
The testing and debugging procedure are all from scratch, including PCB and firmware.
See each dir for more info.
*Note: Display Module Specification or Display Interface Specification are NOT supplied.
License: GPLv2
| Display Interface | Display Type | Brand | Bridge | Size | Part No. | Link |
|---|---|---|---|---|---|---|
| JEIDA LVDS | LCD | AUO | FPGA | 7.0 | G070VW01 V0 | lvds-lcd-auo-fpga |
| MIPI DSI | LCD | Sharp | SSD2828 | 5.0 | LS050T1SX01 | mipi-lcd-sharp-ssd2828 |
| RGB UPS051 | LCD | AUO | FPGA | 3.0 | A030DW01 / A030DW02 | parallel-lcd-auo-fpga |
| RGB | LCD | LG Display | CPLD/FPGA | 5.0 | LD050WV1-SD01 | rgb-lcd-lg-cpld |
| RGB | LCD | LG Display | STM32 | 5.0 | LD050WV1-SD01 | rgb-lcd-lg-stm32 |
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C6, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21 +3 |
| 6 | 5.6k | Resistor_SMD:R_0603_1608Metric | R5, R6, R7, R8, R9, R10 |
| 6 | LED | Resistor_SMD:R_0603_1608Metric | D1, D2, D3, D4, D5, D6 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R11, R12 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C1, C5 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3, J5 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 220 | Resistor_THT:R_Box_L8.4mm_W2.5mm_P5.08mm | R3 |
| 1 | AMS1117 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | AYF333135 | footprints:AYF333135 | J1 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Conn_02x15_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x15_P2.54mm_Vertical | J6 |
| 1 | Crystal | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | ICL7660 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | SSD2828QN4 | footprints:SSD2828QN4 | U2 |
| 1 | STM32F030F4Px | footprints:STM32F030F4P6 | U6 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23 | U4 |
| 1 | XC6206PxxxMR | footprints:XC6206P502PR | U1 |
Questions
How big is the Sharp dsi PCB?
It measures 49.5 × 50.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sharp dsi use?
52 parts, built around the ICL7660N, AMS1117, SSD2828QN4 and AYF333135A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sharp dsi KiCad files?
From the jlywxy/project-display repository on GitHub, at the commit this page was made from: the board is mipi-lcd-sharp-ssd2828/sharp_dsi_pcb/sharp_dsi.kicad_pcb and its schematic mipi-lcd-sharp-ssd2828/sharp_dsi_pcb/sharp_dsi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sharp dsi design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 6 layers180 × 74 mm
- 2 layers54 × 82 mm
Bt audio rec
canardos/bluetooth-wall-player
Firmware and hardware design for a wall-mounted Bluetooth audio player and environmental monitor
63 partsMIT - 2 layers99.4 × 99.6 mm
GR Subscriber Line Interface Module
GadgetReboot/Phone_SLIM
POTS Telephone Subscriber Line Interface Module
112 parts62CC-BY-SA-4.0 - 2 layers97.7 × 58 mm
Bluepill function generator
BojanSof/BluePillWaveGen
DDS function generator build around STM32 BluePill board
41 parts35 - 2 layers48 × 36.5 mm
Osillyscope etchable
tvlad1234/osillyscope
Low cost, low part count CH32V003-based oscilloscope
31 parts30MIT - 2 layers138.8 × 55 mm
MuxPi
SamsungSLAV/muxpi
MuxPi is an open hardware and open software board which was designed to aid in automating tasks on physical devices.
354 parts22Apache-2.0 - 2 layers99.9 × 72.8 mm
