
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

Simple WiFi controlled controller for 2 wire LED strip with alternating LED's driven by an H bridge
Led light contoller board is an open-source printed circuit board by jludwig75, from the jludwig75/led_light_contoller repository on GitHub. It is a 2-layer board of 64.8 × 25.4 mm with 7 parts on 30 nets, routed with 34 tracks and 0 vias.
Its parts include 3 resistors, 2 connectors and 1 diode. It belongs with the radio and wireless boards and the ESP8266 boards of this library.
This is a simple controller for for cheap 2-wire LED strings. These strings are setup with LED's alternating polarity along the two wires. Current inone direction lights every other LED and current in the other direction lights the other LED's in the string. These LED strings are really cheap and often sold with remote controls to control the lighting. The battery life is terrible and the light patterns selections weren't that great. I wrote this Arduino sketch for and ESP8266 to control the LED strings. I am using ESP8266 breakouts from Electrodragon that include a USB port for programming and power. I am also using a DRV8833 H-bridge to controll the LED's powered by the 5V pin from the USB connector to the Electordragon board.
The sketch includes a web server used to controll the light pattern. Each board controls two strings (channels) independently. Note that the sketch is written to switch polarity every 10ms (100Hz). This allows the strings to appear to be contantly lit in both directions.


| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | Screw_Terminal_01x02 | led_light_contoller_board:Screw_Terminal_2.54mm | J1, J2 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | DRV8833_Breakout | led_light_contoller_board:DRV8833_Breakout | D1 |
| 1 | Electrodragon_ESP8266_USB | led_light_contoller_board:Electrodragon ESP8266 USB | E1 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 64.8 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jludwig75/led_light_contoller repository on GitHub, at the commit this page was made from: the board is board_kicad/led_light_contoller_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jludwig75 before reusing the design.