2 layers148.1 × 37.1 mm
2 layers
KiCad
JLimbocker/KiCad- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 80
- Nets
- 76
- Pads
- 271
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 9 Dec 2015
- Updated
- 26 Feb 2016
Overview
KiCad is an open-source printed circuit board by JLimbocker, from the JLimbocker/KiCad repository on GitHub. It is a 2-layer board with 80 parts on 76 nets.
It is built around the MSP430G2203IPW28, AP1117DG and DS3231N/DIP. Its parts include 42 resistors, 16 transistors, 13 diodes, 3 capacitors and 3 ICs. It belongs with the MSP430 boards of this library.
Main components
3
MSP430G2203IPW28
TSSOP-28-40℃~+85℃ 1.8V~3.6V 16 Bit 16MHz 24 256Byte 2KB Built-in FLASH MSP430 CPU16 TSSOP-28 Microcontrollers (MCU/MPU/SOC) ROHSTexas InstrumentsMicrocontrollers (MCU/MPU/SOC)
AP1117DG
SOT-223-40℃~+125℃@(Tj) 1 1.4V@(1A) 18V 1A 70dB@(180Hz) Adjustable、Fixed Over Current Protection、Thermal shutdown Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
DS3231N/DIP
--40℃~+85℃ 2.3V~5.5V Built-in I2C Temperature compensation、Backup power management and battery charging、Programmable clock output、Alarm function - Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time Clocks
Parts
80| Qty | Value | Footprint | References |
|---|---|---|---|
| 42 | R | Resistors_SMD:R_0805_HandSoldering | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +26 |
| 13 | LED_RGB | LEDs:LED_RGB_PLLC-6 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13 |
| 13 | Q_PMOS_GSD | TO_SOT_Packages_SMD:SOT-23 | Q3, Q4, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16 |
| 3 | C | Capacitors_SMD:C_0805_HandSoldering | C1, C2, C3 |
| 3 | Q_NMOS_GSD | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2, Q5 |
| 1 | AP1117 | TO_SOT_Packages_SMD:SOT-23-5 | U3 |
| 1 | BARREL_JACK | Pin_Headers:Pin_Header_Straight_1x02 | CON1 |
| 1 | Battery | Connect:Banana_Jack_2Pin | BT1 |
| 1 | DS3231N | SMD_Packages:SO-16-L | U1 |
| 1 | MSP430G2203IPW28 | SMD_Packages:SOIC-28 | U2 |
| 1 | SW_PUSH | Buttons_Switches_SMD:SW_SPST_FSMSM | SW1 |
Questions
What parts does the KiCad use?
80 parts, built around the MSP430G2203IPW28, AP1117DG and DS3231N/DIP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KiCad KiCad files?
From the JLimbocker/KiCad repository on GitHub, at the commit this page was made from: the board is BC/BC.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the KiCad design in my own project?
Its repository states no licence, so its author keeps all rights: ask JLimbocker before reusing the design.
Similar boards
- 2 layers99.1 × 99.1 mm
- 2 layers100 × 100 mm
SmartSolarHeatingProject
UnknownHero99/SmartSolarHeatingProject
ESP32 based Smart Solar Heating Project
63 parts5 - 2 layers161.3 × 40.6 mm
- 2 layers162.6 × 194.3 mm
- 2 layers210 × 228 mm
- 2 layers99 × 80 mm
MmM
wyolum/mmM
mmMercury is an Open Hardware, blood pressure measurement device (not FDA approved).
167 parts2 - 2 layers
