

Led pekac
- Size
- 186.2 × 39.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 76
- Pads
- 284
- Tracks, vias
- 588, 313
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Jul 2021
- Updated
- 17 Jun 2023
Overview
Led pekac is an open-source printed circuit board by jktjkt, from the jktjkt/led-pekac repository on GitHub. It is a 2-layer board of 186.2 × 39.4 mm with 53 parts on 76 nets, routed with 588 tracks and 313 vias.
It is built around the MAX6956AAX+, MCP3426A0-E/SN and TC1427COA, with the DA56-11GWA and IPD50N06S4L08ATMA2 among its other parts. Its parts include 12 resistors, 11 capacitors, 7 ICs, 7 connectors and 4 transistors.
Main components
5MAX6956AAX+
SSOP-36-300mil-40℃~+125℃ 110uA 2.5V~5.5V 9.5mA、18.5mA、19mA I²C SSOP-36-300mil Digital Tube Drivers ROHSMaxim Integrated (Analog Devices)Digital Tube DriversMCP3426A0-E/SN
SOIC-8-40℃~+125℃ 135uA 15Hz 15Hz、60Hz、240Hz 15ppm/℃ 16 2 2.7V~5.5V Built-in Built-in I2C Sigma-Delta Support Yes SOIC-8 Analog to Digital Converters (ADC) ROHSMicrochip TechnologyAnalog To Digital Converters (ADC)TC1427COA
SOIC-80℃~+70℃ 1.2A 1.2A 2 25ns 35ns 4.5V~16V 500uA MOSFET SOIC-8 Gate Drivers ROHSMicrochip TechnologyGate DriversDA56-11GWA
DIP-180.56 19.05mmx25mmx8mm 2 62.5mW 7 Segment Common Anode Green DIP-18 LED Segment Displays ROHSKingbrightLED Segment DisplaysIPD50N06S4L08ATMA2
TO-252-55℃~+175℃ 1 N-channel 1.09nF 2.2V 4.78nF 50A 60V 64nC@10V 7.8mΩ@10V 71W 80pF N-Channel TO-252 MOSFETs ROHSInfineon TechnologiesMOSFETs
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 12.1k 0.1% | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9, R10, R11, R12 |
| 4 | 220k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3, R4, R5 |
| 3 | 160 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, R7, R8 |
| 2 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8, C9 |
| 2 | 10uF/50V | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 2 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C7 |
| 2 | 22uF/10V | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | DA56-11GWA | Display_7Segment:DA56-11CGKWA | U4, U5 |
| 2 | IPD50N06S4L08ATMA2 | Package_TO_SOT_SMD:TO-252-2 | Q3, Q4 |
| 1 | 100nF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C10 |
| 1 | 10uF Tantalum | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C11 |
| 1 | 24V | pekac-library:CUI_TB002-500-04BE | J2 |
| 1 | 3.3V (Pi) | TestPoint:TestPoint_Loop_D3.50mm_Drill1.4mm_Beaded | TP2 |
| 1 | 3.3VA (LED) | TestPoint:TestPoint_Loop_D3.50mm_Drill1.4mm_Beaded | TP3 |
| 1 | 47k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 47nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6 |
| 1 | 5V | TestPoint:TestPoint_Loop_D3.50mm_Drill1.4mm_Beaded | TP1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J1 |
| 1 | Conn_01x40_Female | pekac-library:SAMTEC_HLE-120-02-X-DV-PE-BE_no_internal_holes_reversed | J7 |
| 1 | Console | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Cool | pekac-library:CUI_TB002-500-04BE | J5 |
| 1 | GND | TestPoint:TestPoint_Loop_D3.50mm_Drill1.4mm_Beaded | TP6 |
| 1 | LED1 | LED_SMD:LED_1206_3216Metric_Castellated | D1 |
| 1 | LED2 | LED_SMD:LED_1206_3216Metric_Castellated | D2 |
| 1 | MAX6956AAX+ | pekac-library:MaximSSOP36 | U3 |
| 1 | MCP3426A0-E/SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | PWM0 | TestPoint:TestPoint_Loop_D3.50mm_Drill1.4mm_Beaded | TP7 |
| 1 | PWM1 | TestPoint:TestPoint_Loop_D3.50mm_Drill1.4mm_Beaded | TP8 |
| 1 | PWR | LED_SMD:LED_1206_3216Metric_Castellated | D3 |
| 1 | Pi Zero | Module:Raspberry_Pi_Zero_Socketed_THT_FaceDown_MountingHoles | J4 |
| 1 | SCL | TestPoint:TestPoint_Loop_D3.50mm_Drill1.4mm_Beaded | TP5 |
| 1 | SDA | TestPoint:TestPoint_Loop_D3.50mm_Drill1.4mm_Beaded | TP4 |
| 1 | SWITCHING-3TERM-3V3 | pekac-library:CONV_P78E05-1000 | U2 |
| 1 | SWITCHING-3TERM-5V | pekac-library:CONV_P78E05-1000 | U1 |
| 1 | TC1427COA | pekac-library:Microchip-TC1427COA-Level_A | U6 |
| 1 | Warm | pekac-library:CUI_TB002-500-04BE | J6 |
| 1 | Wheel | pekac-library:Bourns-PEC12R-3220F-S0024-MFG | SW1 |
More from jktjkt/led-pekac
1- 2 layers71.8 × 30.5 mm

Similar boards
- 2 layers100 × 100 mm

- 2 layers85 × 62.5 mm

- 2 layers217.1 × 393.8 mm

Sweepv2
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
53 parts2.1k - 2 layers121.9 × 81.3 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
53 parts1kGPL-3.0 - 2 layers48 × 48 mm

- 2 layers103.7 × 74.1 mm

PicoGUS
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
53 parts805 - 2 layers60.5 × 76.8 mm

Headphones prototype pcb
strangeparts/niubi-headphones
Flexible circuit board design for adding a headphone jack to an iPhone 7
53 parts493MIT - 2 layers59.1 × 26.1 mm

Questions
How big is the Led pekac PCB?
It measures 186.2 × 39.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Led pekac use?
53 parts, built around the MAX6956AAX+, MCP3426A0-E/SN, TC1427COA and DA56-11GWA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Led pekac KiCad files?
From the jktjkt/led-pekac repository on GitHub, at the commit this page was made from: the board is led-pekac.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Led pekac design in my own project?
Its repository states no licence, so its author keeps all rights: ask jktjkt before reusing the design.