
SmartSpin2k Panelized
doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!

Breadboard power supply is an open-source printed circuit board by JKpro-file, from the JKpro-file/Breadboard_power_supply repository on GitHub. It is a 2-layer board of 51.4 × 30.8 mm with 18 parts on 10 nets, routed with 104 tracks and 1 via.
It is built around the EG1218. Its parts include 7 connectors, 3 capacitors, 3 resistors, 2 ICs and 1 diode. It belongs with the power boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | C | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3 |
| 2 | 560R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R3 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J5, J6 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Vertical | J3, J4 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J2, J7 |
| 1 | 330R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | EG1218 | digikey-footprints:Switch_Slide_11.6x4mm_EG1218 | S1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LM317_TO-220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LM78M05_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
The 17 most common of 18 parts.

doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!


futureshocked/KLP4e_Breadboard-Power-Supply
This is the repository for the "4x8x8 LED Matric Clock" project.

oskitone/poly555
The POLY555 is a polyphonic, analog, square wave synth based on the 555 timer chip.

unknownusername504/WirelessMouse
A wireless mouse with open source pcb/schematic as well as drivers to come.

0xlama/ATtiny_LED_Matrix_Display_Badge
An ATtiny85 based badge size PCB that can display alphabets and numbers .

ajvizganapathy-pixel/FlipperZero-DIY-STM32WB55-NucleusDark
DIY Flipper Zero clone using STM32WB55CGU6 — KiCad PCB, Momentum firmware, 200+ apps, BadUSB scripts, wiring diagrams
It measures 51.4 × 30.8 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the EG1218. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JKpro-file/Breadboard_power_supply repository on GitHub, at the commit this page was made from: the board is Breadboard_power_supply.kicad_pcb and its schematic Breadboard_power_supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JKpro-file before reusing the design.