Skip to the content
2 layers40 × 40 mmCableAdapter, the printed circuit board in 3D

CableAdapter

jkelty/psi46-pcb

Collection of PCBs designed for PSI46 projects

Size
40 × 40 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
20
Pads
81
Tracks, vias
191, 40
Pours
1
Routed
Yes
KiCad
KiCad 3
Created
4 Jun 2015
Updated
10 Aug 2015

Overview

CableAdapter is an open-source printed circuit board by jkelty, from the jkelty/psi46-pcb repository on GitHub. It is a 2-layer board of 40 × 40 mm with 7 parts on 20 nets, routed with 191 tracks and 40 vias.

Its parts include 2 resistors and 2 connectors.

README

README.md

psi46-pcb

Collection of PCBs designed for PSI46 projects

Contains the following PCB:

  • Module PCB
    • module-adapter-FPix: The module adapter used to connect FPix modules to a DTB
    • module-adapter-active-BPix: The module adapter to be used to connect BPix modules to a DTB over a low-impedance cable. Has active components on it to refresh signals.
  • Single ROC PCB
    • singleroc-adapter-testbeam: A shortened version of the PSI single ROC adapter
    • singleroc-carrier-testbeam:
  • Test PCB
    • module-DTBtest-FPix: A board that resembles the passive/ohmic behaviour of a FPix module to test DTB readings of IA, ID, RTD-temperature and HV

Parts

7
QtyValueFootprintReferences
260SM0402R1, R2
2CONN-SMK20SMK20hvJ1, J2
1LOGOLOGOG***
1LOGOCMSLOGOCMSG***
1M2lochM2loch

More from jkelty/psi46-pcb

5
  • 2 layers64 × 50.8 mmSingleroc adapter tb2, the printed circuit board in 3D

    Singleroc adapter tb2

    jkelty/psi46-pcb

    Collection of PCBs designed for PSI46 projects

    34 parts
  • 4 layers30.5 × 64 mmModule adapter tb, the printed circuit board in 3D

    Module adapter tb

    jkelty/psi46-pcb

    Collection of PCBs designed for PSI46 projects

    29 parts
  • 2 layers64 × 52 mmSingleroc adapter tb, the printed circuit board in 3D

    Singleroc adapter tb

    jkelty/psi46-pcb

    Collection of PCBs designed for PSI46 projects

    28 parts
  • 2 layers100 × 40 mmFPixDTBtestload, the printed circuit board in 3D

    FPixDTBtestload

    jkelty/psi46-pcb

    Collection of PCBs designed for PSI46 projects

    18 parts

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the CableAdapter PCB?

It measures 40 × 40 mm and has 2 copper layers, 1.6 mm thick.

What parts does the CableAdapter use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CableAdapter KiCad files?

From the jkelty/psi46-pcb repository on GitHub, at the commit this page was made from: the board is module-adapter-FPix/CableAdapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the CableAdapter design in my own project?

Its repository states no licence, so its author keeps all rights: ask jkelty before reusing the design.