

BikePump
The PCB board for my automatic bike tire fill station.
- Size
- 101.6 × 85.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 45
- Pads
- 104
- Tracks, vias
- 167, 18
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 14 Mar 2023
- Updated
- 4 Apr 2023
Overview
BikePump is an open-source printed circuit board by jkasari, from the jkasari/bikePumpPCB repository on GitHub. It is a 2-layer board of 101.6 × 85.1 mm with 17 parts on 45 nets, routed with 167 tracks and 18 vias.
Its parts include 6 switches, 4 connectors, 2 resistors, 2 transistors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Q_NPN_BCE | bikePumpFootPrints:DSS60601MZ4-13_NPN_Transitor | Q1, Q2 |
| 2 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R4 |
| 1 | AdaFruit_ADS1115 | bikePumpFootPrints:AdaFruit_ADS1115_Board | U1 |
| 1 | Arduino_Nano | Module:Arduino_Nano | A1 |
| 1 | Button_1 | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Button_2 | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | Button_3 | Button_Switch_THT:SW_PUSH_6mm | SW3 |
| 1 | Button_4 | Button_Switch_THT:SW_PUSH_6mm | SW4 |
| 1 | Button_5 | Button_Switch_THT:SW_PUSH_6mm | SW5 |
| 1 | Button_6 | Button_Switch_THT:SW_PUSH_6mm | SW6 |
| 1 | LCD_Screen | bikePumpFootPrints:LCD_Screen | LCD 1602 |
| 1 | Power_In | Connector_Wire:SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm | J3 |
| 1 | Regulator_1 | Connector_Wire:SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm | J2 |
| 1 | Regulator_2 | Connector_Wire:SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm | J1 |
| 1 | pressure_sensor | Connector_Wire:SolderWire-0.25sqmm_1x04_P4.5mm_D0.65mm_OD2mm | J5 |
Similar boards
- 2 layers50 × 35 mm

- 2 layers139.7 × 62.2 mm

- 2 layers29.2 × 55.9 mm

Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm

- 2 layers56.3 × 55.7 mm

StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm

SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm

- 2 layers36 × 51 mm

Questions
How big is the BikePump PCB?
It measures 101.6 × 85.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BikePump use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BikePump KiCad files?
From the jkasari/bikePumpPCB repository on GitHub, at the commit this page was made from: the board is bikePump.kicad_pcb and its schematic bikePump.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BikePump design in my own project?
Its repository states no licence, so its author keeps all rights: ask jkasari before reusing the design.