
Vic2020mainboard
danwerner21/vic2020
A Vic-20 clone created with [almost] all readily available parts

Mod fm is an open-source printed circuit board by jk1mly, from the jk1mly/pcb-audio-if repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 59.7 × 30.5 mm with 30 parts on 31 nets, routed with 66 tracks and 0 vias.
It is built around the 2SC1815. Its parts include 8 connectors, 7 resistors, 4 capacitors, 2 diodes and 1 transistor.
PCからのオーデイ信号の入出力と、無線機のマイク、スピーカを接続するインタフェース 簡易的(音を検波)なVOX機能を内蔵しているのでPCからPTT制御ができない場合にも使える
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R2, R3, R4, R5, R6, R7 |
| 5 | TestPoint | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP3, TP4, TP5, TP6, TP7 |
| 4 | AudioJack2_Ground | Connector_Audio:Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J1, J2, J3, J4 |
| 4 | C_Polarized | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2, C3, C4 |
| 4 | Conn_01x05_Socket | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5, J6, J7, J8 |
| 2 | Diode | Diode_THT:D_A-405_P2.54mm_Vertical_KathodeUp | D1, D2 |
| 2 | TestPoint | TestPoint:TestPoint_Plated_Hole_D3.0mm | TP1, TP2 |
| 1 | 2SC1815 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1 |
| 1 | R_Potentiometer_Trim | Potentiometer_THT:Potentiometer_Vishay_T73YP_Vertical | RV1 |

danwerner21/vic2020
A Vic-20 clone created with [almost] all readily available parts

GuitarML/GuitarPedalPCBs
Collection of KiCad circuit board designs for guitar pedals you can build yourself.



IdahoLabResearch/AcCCS
A collection of tools and scripts used to communicate and emulate Electric Vehicle Communication Controllers (EVCC) and Supply Equipment Communication Controllers (SECC).

StudioKAT/Toolbox
主な機能: - オーディオ/CVミキサー(加算・減算) - CVへのオフセット追加(5V/10V)・極性反転 - 1:3 バッファード・マルチプル - 2:2 ユニティミキサー - 3:1 アベレージミキサー(各チャンネルのゲイン = 1/3) - SIGNセクション:インバーター / 半波整流 / 全波整流 - LOGICセクション:アナログOR / アナログAND - S&Hセクション:サンプル&ホールド / ホワイトノイズ出力…


It measures 59.7 × 30.5 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the 2SC1815. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jk1mly/pcb-audio-if repository on GitHub, at the commit this page was made from: the board is mod-fm.kicad_pcb and its schematic mod-fm.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).