
SCAN
jjsprandel/SCAN_PCB
Welcome to the SCAN repository! Below, you will find all the necessary information, from hardware design to software documentation.

Welcome to the SCAN repository! Below, you will find all the necessary information, from hardware design to software documentation.
SCAN mainboard is an open-source printed circuit board by jjsprandel, from the jjsprandel/SCAN_PCB repository on GitHub. It is a 2-layer board of 100 × 70 mm with 58 parts on 77 nets, routed with 629 tracks and 100 vias.
It is built around the ESP32-C6-WROOM-1-N8, PCF8574T and AMS1117-3.3, with the ESD122DMYR, TVS2200DRV and 1N4148W among its other parts. Its parts include 20 resistors, 11 capacitors, 8 connectors, 6 ICs and 5 diodes. It belongs with the computers and single-board computers boards and the ESP32 and RISC-V boards of this library.

Welcome to the SCAN repository! Below, you will find all the necessary information, from hardware design to software documentation.
Here are the current statuses of our GitHub workflows:
| Workflow Name | Status |
|---|---|
| CI - Build | |
| Docker - Test Build |
SCAN is a low-cost, IoT-driven kiosk system designed to provide real-time analytics based on check-in and check-out information. By integrating NFC-based authentication, real-time data processing, and a user-friendly interface, SCAN provides users with a near-effortless check-in experience and provides facilities with actionable insights for improving operations. SCAN is able to track attendance and provide detailed analytics on occupancy trends, peak usage hours, and visit durations. These insights are accessible to administrator and facility managers via SCAN’s web application, which can provide them with the necessary statistics to allocate resources efficiently, optimize staffing, and improve user experiences.
Below is the schematic of the hardware design:

Key Features:
Additional hardware files can be found in the hardware directory.
Here's the PCB design layout:

Important Notes:
The firmware is designed to work with the hardware for controlling the device. You can find the code here.
Key Libraries Used:
Follow these steps to install the firmware:
Detailed instructions are available in the installation guide.
To build the project, follow these steps:
git clone https://github.com/jjsprandel/SCAN.gitidf.py buildidf.py --port 'rfc2217://host.docker.internal:4000?ign_set_control' flashTips:
This project has the following dependencies that need to be installed:
USB Drivers: For proper communication with the hardware, ensure that the appropriate USB drivers are installed.
Docker Desktop: Required to run the ESP-IDF containerized environment.
Visual Studio Code: Recommended IDE for editing the firmware code.
Git: Version control system.
SCAN © 2025 is licensed under Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-nd/4.0/ or see the LICENSE file.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R6, R10, R34, R37 |
| 6 | 0Ω | Resistor_SMD:R_0805_2012Metric | R36, R38, R39, R60, R61, R62 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 2 | .1u | Capacitor_SMD:C_0603_1608Metric | C8, C53 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C5, C7 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C4, C6 |
| 2 | 2.2k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C9, C10 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D3 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 22.1k | Resistor_SMD:R_0805_2012Metric | R18 |
| 1 | 3.3k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 47.5k | Resistor_SMD:R_0805_2012Metric | R17 |
| 1 | ADMIN_LED | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D6 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | BC847BDW1 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q7 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | CP2102N-A02-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U8 |
| 1 | Conn_01x10 | Connector_Molex:Molex_Micro-Fit_3.0_43650-1000_1x10_P3.00mm_Horizontal | J1 |
| 1 | DEBUG_BREAKOUT | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J5 |
| 1 | ESD122DMYR | SCAN_footprints:DMY0003A | U5 |
| 1 | ESP32-C6-WROOM-1-N8 | SCAN_footprints:ESP32-C6-WROOM-1-N8 | U1 |
| 1 | FAILURE_LED | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D5 |
| 1 | KEYPAD_CONN | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J2 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D1 |
| 1 | PCF8574 | SCAN_footprints:DIP794W45P254L1969H508Q16 | U2 |
| 1 | PIR_CONN | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J4 |
| 1 | PN532_CONN | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J3 |
| 1 | PWR_MUX | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J11 |
| 1 | RST_SWITCH | SCAN_footprints:SW_SPST_PTS647_Sx38 | SW1 |
| 1 | SUCCESS_LED | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D4 |
| 1 | SW_Push | SCAN_footprints:SW_SPST_PTS647_Sx38 | SW2 |
| 1 | TFT_CONN | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Horizontal | J7 |
| 1 | TVS2200DRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U4 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-AB_Molex_47590-0001 | J8 |

jjsprandel/SCAN_PCB
Welcome to the SCAN repository! Below, you will find all the necessary information, from hardware design to software documentation.


astinchang/ESP32-Wireless-Air-Filter-and-Monitor
This project is an automatic air filtration system built around an ESP32 microcontroller. The goal of the project is to improve indoor air quality while saving energy by only increasing fan speed when the air quality…


SIMCA-USI/Giroscopio_PCB_EMT
Proyecto de PCB con uso para ensayos de Seguridad Laboral en conductores de la EMT

NuttyShell/NuttyBadge
NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software

AlexanderRoller/heartToHeart
HeartToHeart is a hardware project designed for IoT prototyping, featuring a custom PCB and ESP32 microcontroller.

electro-practically/wled-controller
WLED ESP32 controller powered by USB-C Power Delivery.
It measures 100 × 70 mm and has 2 copper layers, 1.6 mm thick.
58 parts, built around the ESP32-C6-WROOM-1-N8, PCF8574T, AMS1117-3.3 and ESD122DMYR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jjsprandel/SCAN_PCB repository on GitHub, at the commit this page was made from: the board is hardware_design/PERIPHERALS_PCB/SCAN_mainboard.kicad_pcb and its schematic hardware_design/PERIPHERALS_PCB/NFC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jjsprandel before reusing the design.