
Aether
nasheed-x/aether
Aether is a versatile flight computer for testing flight hardware and software, focusing on sensor fusion to monitor rocket states and interface with on-board systems.

Trying to broaded my horizon by partially redesigning a humanoid robot, making a PCB and developing code to control it via the web
Servo board is an open-source printed circuit board by Jipolie01, from the Jipolie01/robot-thing repository on GitHub. It is a 2-layer board of 81.5 × 96.5 mm with 55 parts on 67 nets, routed with 345 tracks and 0 vias.
It is built around the PCA9685PW and AO3401A. Its parts include 24 connectors, 23 resistors, 4 capacitors, 2 diodes and 1 IC. It belongs with the robots and motor control boards and the ESP32 boards of this library.
Trying to broaded my horizon by partially redesigning a humanoid robot, making a PCB and developing code to control it via the web
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 220 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R10, R11, R12, R13, R14, R15, R16, R22, R23 +2 |
| 2 | 2.2k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R17, R18 |
| 2 | 330 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R19, R20 |
| 2 | 470uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C1, C4 |
| 2 | 47uF | Capacitor_SMD:CP_Elec_5x5.4 | C2, C3 |
| 2 | Conn_01x11_Male | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | J16, J17 |
| 2 | LED | LED_SMD:LED_1206_3216Metric | D1, D2 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R21 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x02_Female | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J18 |
| 1 | Left_ESP32 | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J14 |
| 1 | PCA9685PW | Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm | U1 |
| 1 | Power_input | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_2-G-3.81_1x02_P3.81mm_Vertical | J12 |
| 1 | Right_ESP32 | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J15 |
| 1 | body_left | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J7 |
| 1 | body_left_up | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5 |
| 1 | body_right | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J2 |
| 1 | body_right_up | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J13 |
| 1 | box1_down | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J23 |
| 1 | box1_up | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J10 |
| 1 | box2_down | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J24 |
| 1 | box2_up | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J11 |
| 1 | box3_down | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J21 |
| 1 | box3_up | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J8 |
| 1 | box4_down | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J22 |
| 1 | box4_up | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J9 |
| 1 | knee_left | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J6 |
| 1 | knee_right | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J1 |
| 1 | left_shoulder | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J4 |
| 1 | left_wrist | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J3 |
| 1 | right_shoulder | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J20 |
| 1 | right_wrist | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J19 |

nasheed-x/aether
Aether is a versatile flight computer for testing flight hardware and software, focusing on sensor fusion to monitor rocket states and interface with on-board systems.


robotique-udes/Exo_Electric
This repo contains all the information about the PCB and electrical schematics of Biogenius.

nasa-jpl/open-source-rover
A build-it-yourself, 6-wheel rover based on the rovers on Mars!

pms67/HadesFCS
Complete flight control system designed from scratch. Hardware designed with KiCad.



Brobiwann/ESP-spider
The ESP-Spider is a quadruped robot inspired by the miniKame (https://github.com/JavierIH/miniKame) . Like the miniKame, it uses sinusoidal functions to control servo positions, but the design and code were developed…
It measures 81.5 × 96.5 mm and has 2 copper layers, 1.6 mm thick.
55 parts, built around the PCA9685PW and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Jipolie01/robot-thing repository on GitHub, at the commit this page was made from: the board is board/servo_board/servo_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Jipolie01 before reusing the design.