

4180-Final Project
Georgia Institute of Technology \ ECE 4180 (Embedded Systems Design)
- Size
- 55.7 × 58.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 49
- Pads
- 177
- Tracks, vias
- 50, 12
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 14 Nov 2023
- Updated
- 9 Dec 2023
Overview
4180-Final Project is an open-source printed circuit board by jinjupk, from the jinjupk/4180-Final-Project repository on GitHub. It is a 4-layer board of 55.7 × 58.2 mm with 22 parts on 49 nets, routed with 50 tracks and 12 vias.
It is built around the LTM8053EY-1#PBF. Its parts include 6 capacitors, 6 connectors, 4 ICs and 2 resistors.
Main components
1README
README.mdContactless Car Unlocking System [ECE 4180 Final Project]
Georgia Institute of Technology
ECE 4180 (Embedded Systems Design)
Pearl Park
Lawrence Ro
Swarna Shah
Overview
The Contactless Car Unlocking System allows a user to unlock a car with a specific NFC card instead of using a physical key. In the following demonstration, a Buzzcard student ID is scanned at the sensor location to remotely press the unlock button inside of the car using a 5V relay. The system is powered by the car’s battery which is stepped down to a low enough voltage with a voltage regulator. All components are interfaced through a custom printed circuit board (PCB) and housed in a 3D printed enclosure.
Components
- MBED LPC1768
- uLCD-144-G2 128 by 128 Smart Color LCD
- 5V relay
- PN532 NFC reader
- Custom PCB
- 3D printed housing
Hardware
A custom 4-layer PCB includes power management, the microcontroller, and peripherals.
- 4-layer PCB
- LTM8053 Switching Regulator (integrated inductor, 6A max output current)
- Dual LP38692 LDO Voltage Regulator (1A output, separate for servo and microcontroller power)
Software
The program runs in three separate threads to manage the NFC scanner and uLCD at the same time.
- Main Thread - Initializes uLCD and NFC scanner threads.
- uLCD Thread - Displays invalid card and card accepted messages according to card scanned.
- NFC Reader - Asks scanner for ID of card scanned, checks it against a known ID, and turns on relay accordingly.
Video Demo
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10 uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C8, C9 |
| 2 | LP38692SDX-5.0_NOPB | 0_myLib:SON95P300X300X80-7N | IC2, IC3 |
| 1 | 33.2k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 34k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 4.7 uF | Capacitor_SMD:C_1206_3216Metric | C6 |
| 1 | 47 uF | Capacitor_SMD:C_1210_3225Metric | C7 |
| 1 | I2C | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | LTM8053EY-1#PBF | 0_myLib:BGA48C100P6X8_625X900X352 | IC1 |
| 1 | SERVO | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5 |
| 1 | SPI | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J2 |
| 1 | UART | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | VIN | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J7 |
| 1 | uLCD | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J3 |
| 1 | ~ | 0_myLib:DIP-40_900 | U1 |
The 18 most common of 22 parts.
Similar boards
- 4 layers62.8 × 53.3 mm

- 4 layers91.5 × 65 mm

Spotmicro
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
22 parts915 - 4 layers113.3 × 64 mm

- 4 layers78.1 × 77.5 mm

- 4 layers65 × 51.5 mm

- 4 layers41.5 × 41.6 mm

RAM Module
ahmadexp/Open-Source-PC110
Figuring out the missing technical documentation of the beloved PC110
22 parts98 - 4 layers29 × 61 mm

Cfxsx
neggles/cfxsx
CFexpress to M.2 NVMe drive adapter. Intended for Xbox Series X and S, but untested.
22 parts69CC-BY-SA-4.0 - 4 layers

Tiav3 s14160
OpenSiPM/sipm-bias-control
Single channel silicon photomultipliers for high-speed fluorescence imaging
22 parts44
Questions
How big is the 4180-Final Project PCB?
It measures 55.7 × 58.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the 4180-Final Project use?
22 parts, built around the LTM8053EY-1#PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 4180-Final Project KiCad files?
From the jinjupk/4180-Final-Project repository on GitHub, at the commit this page was made from: the board is hardware/pcb/4180_final_project.kicad_pcb and its schematic hardware/pcb/4180_final_project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 4180-Final Project design in my own project?
Its repository states no licence, so its author keeps all rights: ask jinjupk before reusing the design.
