

ATmega32 USART Serial Data Monitor System v001
This project was completed for CT321PBL04 as an exercise in serial communication using the ATmega32 microcontroller.
- Size
- 166.5 × 129.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 45
- Pads
- 99
- Tracks, vias
- 141, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 16 Jun 2026
- Updated
- 18 Jul 2026
Overview
ATmega32 USART Serial Data Monitor System v001 is an open-source printed circuit board by jimyjobs, from the jimyjobs/ATmega32_USART_Serial_Data_Monitor repository on GitHub. It is a 2-layer board of 166.5 × 129.5 mm with 17 parts on 45 nets, routed with 141 tracks and 0 vias.
It is built around the ATMEGA32A-AU. Its parts include 4 capacitors, 3 resistors, 3 switches, 2 diodes and 1 IC. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdATmega32 USART Serial Data Monitor System
Overview
This project was completed for CT_321_PBL_04 as an exercise in serial communication using the ATmega32 microcontroller.
The idea behind the project was simple: monitor the state of multiple push buttons and report their status through a USART connection. In addition to transmitting data, the microcontroller was also required to receive commands from a serial terminal and respond appropriately.
The project started with a SimulIDE prototype to verify the firmware logic before moving to schematic capture and PCB design in KiCad.
Development Process
The firmware was written in C using MPLAB XC8. USART communication was configured for 9600 baud at an 8 MHz system clock. Three push buttons were connected as digital inputs and two LEDs were used to provide visual feedback during operation.
Once the firmware was working correctly in simulation, a custom PCB was designed in KiCad. The design includes:
- ATmega32 DIP package
- 8 MHz crystal oscillator
- Crystal load capacitors
- Decoupling capacitors
- Three push-button inputs
- Two indicator LEDs
- USART header for serial communication
After routing was completed, the board was checked using KiCad's Design Rule Checker (DRC) and all reported issues were resolved before generating the manufacturing files.
Functional Testing
Testing was performed in SimulIDE using the SerialTerm-32 terminal.
Switch Monitoring
Each switch press generated the expected message on the serial terminal.
Example:
SW1 PRESSED
SW2 PRESSED
SW3 PRESSED
Echo Function
To verify bidirectional communication, text entered into the serial terminal was echoed back by the microcontroller.
Example:
Input: hello
Output: hello
STATUS Command
A STATUS command was added to display the current state of the monitored switches.
Example response:
SW1=0
SW2=0
SW3=0
LED Behaviour
One LED was used as a status indicator while the second LED was used to acknowledge valid command processing. During testing both LEDs behaved as expected.
PCB Verification
Before generating the fabrication files, the PCB was checked using KiCad verification tools.
Final verification results:
- No ERC errors
- No DRC violations
- No unrouted nets
- Gerber files generated successfully
- Drill files generated successfully
The board was also reviewed using KiCad's 3D Viewer to confirm component placement and overall appearance.
What I Learned
Through this project I gained practical experience with:
- USART initialization and configuration
- Serial communication debugging
- Command-based firmware design
- PCB layout and routing
- Gerber generation for manufacturing
- Verification using ERC and DRC tools
Conclusion
The final system met all project requirements. The ATmega32 successfully transmitted switch events, received serial commands, and provided visual feedback through LEDs. Both the firmware and PCB design were verified through simulation and design checks, resulting in a complete and manufacturable embedded system project.
GROUP MEMBERS
- NASANIA MSENGI T23-03-00262
- NERUSIGWE PATRICK T23-03-17871
- JIM JOB T23-03-11228
- STEPHEN SAMWEL T23-03-01246
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3 |
| 2 | 100pF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C4 |
| 2 | 22pF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 2 | 330R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | LED | LED_THT:LED_D5.0mm | D1, D2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 8MHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | ATmega32A | Package_DIP:DIP-40_W15.24mm | U1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | WC1602A | Display:WC1602A | DS1 |
Similar boards
- 2 layers216.7 × 89.7 mm

- 2 layers150 × 97 mm

Controller mega32l
dmogn/plc_controller_mega32l_pcb_scheme
PLC controller hardware PCB scheme. ATMega32L, RS485 industrial bus interface, 8 ADC inputs, 8 PWM out, 6 GPIO
82 parts7MIT - 2 layers386.1 × 102 mm

- 2 layers100 × 100 mm

KicadJE uP DAC
promesoft/KicadJE_uP_DAC
STM32 and ATMEGA32A - Eurorack DAC MCP4822 output - Use for Sub 400Hz DDS, LFO, ADSR, Effects - and a small 555 VCO - DDS1 DDS2
275 parts7 - 2 layers80 × 60 mm

Atari SIO2SD Igi Version 11-2016
RichardRozehnal/Atari-SIO2SD-Igi-Version
SIO2SD disk drive emulator for 8bit Atari.
77 parts4GPL-3.0 - 2 layers100 × 100 mm

KicadJE ADSR Mega32
promesoft/KicadJE_ADSR_Mega32
Envelope for ATMEGA32A - Formant VCO - PT2399 Reverb
217 parts2MIT - 2 layers39 × 58.5 mm

Atari SIO2SD Mini
RichardRozehnal/Atari-SIO2SD-Mini
Atari SIO2SD disk drive emulator for 8bit Atari.
41 parts2GPL-3.0 - 2 layers52.6 × 40.2 mm

Thinkpad keyboard
vroland/epd-laptop
Collection of design files and notes towards a portable e-Ink device.
13 parts1
Questions
How big is the ATmega32 USART Serial Data Monitor System v001 PCB?
It measures 166.5 × 129.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ATmega32 USART Serial Data Monitor System v001 use?
17 parts, built around the ATMEGA32A-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ATmega32 USART Serial Data Monitor System v001 KiCad files?
From the jimyjobs/ATmega32_USART_Serial_Data_Monitor repository on GitHub, at the commit this page was made from: the board is kicad/pcb/ATmega32_USART_Serial_Data_Monitor_System_v001.kicad_pcb and its schematic kicad/schematic/ATmega32_USART_Serial_Data_Monitor_System_v001.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ATmega32 USART Serial Data Monitor System v001 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jimyjobs before reusing the design.