
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

Qfn24-4x4-p0.5 is an open-source printed circuit board by jimktrains, from the jimktrains/breakoutboards repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 17.4 × 32.4 mm with 10 parts on 26 nets, routed with 158 tracks and 6 vias.
It is built around the ATTINY417-MF. Its parts include 3 connectors, 2 resistors, 2 diodes, 1 capacitor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x12_Pin | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J1001, J1002 |
| 2 | LED | JSK:LED_0402_1005Metric | D1001, D1002 |
| 2 | R_US | Resistor_SMD:R_0402_1005Metric | R1001, R1002 |
| 1 | ATtiny417-M | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1001 |
| 1 | C | Capacitor_SMD:C_0402_1005Metric | C1001 |
| 1 | Push_Button | Button_Switch_THT:SW_PUSH_6mm | SW1001 |
| 1 | ~ | JSK:8-pin-clip | J1003 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 17.4 × 32.4 mm and has 2 copper layers, 1.6 mm thick.
10 parts, built around the ATTINY417-MF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jimktrains/breakoutboards repository on GitHub, at the commit this page was made from: the board is qfn24-4x4-p0.5/qfn24-4x4-p0.5.kicad_pcb and its schematic qfn24-4x4-p0.5/qfn24-4x4-p0.5.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).