Skip to the content
2 layersEV BMS Cell Protection, the printed circuit board in 3D

EV BMS Cell Protection

jimchantes/EV-BMS-Cell-Protection

An overvoltage and undervoltage monitoring circuit (Window Comparator) designed for a Formula Student EV Li-Ion battery pack.

Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
6
Pads
20
Tracks, vias
44, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
25 Sep 2026
Updated
25 Sep 2026

Overview

EV BMS Cell Protection is an open-source printed circuit board by jimchantes, from the jimchantes/EV-BMS-Cell-Protection repository on GitHub, published under the MIT licence. It is a 2-layer board with 6 parts on 6 nets, routed with 44 tracks and 0 vias.

It is built around the LM393. Its parts include 4 resistors, 1 IC and 1 connector. It belongs with the power boards of this library.

Main components

1

README

README.md

EV Li-Ion Battery Cell Protection Circuit (Window Comparator)

An overvoltage and undervoltage monitoring circuit (BMS/AMS aspect) designed for a Formula Student Electric Vehicle (EV). The circuit monitors a single lithium-ion cell, ensuring it stays within the safe operating window of 3.0V to 4.2V. If the cell voltage violates these parameters, the system triggers a 0V Fault Signal to open the safety shutdowns.

Project Structure

  • /Simulation: LTspice circuit schematic and transient/DC sweep simulation files.
  • /Hardware: KiCad schematic blueprints, footprint assignments, and PCB layout routing.

Technical Specifications

  • Overvoltage Threshold (OV): 4.2V
  • Undervoltage Threshold (UV): 3.0V
  • Logic Output: 5V (Safe Condition) / 0V (Fault Condition)
  • Threshold Reference: Precision resistive ladder divider network (1.6kΩ / 2.4kΩ / 6.0kΩ) connected to a regulated 5V VCC line.

Simulation & Validation (LTspice)

The circuit behavior was validated using LTspice. To bypass idealized push-pull macro-model contention, the window comparator output was isolated utilizing a diode network pulled up to a stable 5V rail.

image image

Result: The simulation confirms a sharp, deterministic transition to 0V whenever the swept input voltage falls below 3.0V or exceeds 4.2V.

Hardware Design (KiCad PCB)

The validated schematic was fully routed into a functional, single-layer Through-Hole (THT) PCB optimized for easy benchtop prototyping and verification.

  • Core IC: LM393 Dual Differential Comparator (DIP-8 package)
  • Routing: 45-degree trace angles to minimize EMI and maintain professional manufacturing standards.
  • Connector: 4-Pin terminal header separating Vin (Cell Monitor), VCC (5V System Power), GND, and the Fault Output.
image image

Parts

6
QtyValueFootprintReferences
11.6kΩResistor_SMD:R_0805_2012MetricR2
110kΩResistor_SMD:R_0805_2012MetricR1
12.4kΩResistor_SMD:R_0805_2012MetricR3
16kΩResistor_SMD:R_0805_2012MetricR4
1Conn_01x04_PinConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ1
1LM393Package_DIP:DIP-8_W7.62mmU1

Similar boards

  • 2 layers231.1 × 106.7 mmSnark barker, the printed circuit board in 3D

    Snark barker

    schlae/snark-barker

    A 100% compatible replica of the famed SB 1.0 sound card

    199 parts687
  • 2 layers130 × 80 mmSmu main 1, the printed circuit board in 3D

    Smu main 1

    jaromir-sukuba/J-SMU

    DIY source-measure unit

    210 parts244
  • 2 layers100 × 85 mmVNA, the printed circuit board in 3D

    VNA

    profdc9/VNA

    Vector Network Analyzer based on the STM32F103C8T6 bluepill

    178 parts93
  • 4 layers292.1 × 88.3 mmSnark barker mca, the printed circuit board in 3D

    Snark barker mca

    schlae/snark-barker-mca

    A Sound Blaster compatible sound card for Micro Channel bus computers

    177 parts69
  • 2 layers133 × 98 mmPrecharge, the printed circuit board in 3D

    Precharge

    michaelruppe/FSAE

    Projects for Formula SAE Electric Vehicle competition (Australia 2019/2020)

    121 parts59MIT
  • 4 layers285.1 × 48.1 mmAyab esp32, the printed circuit board in 3D

    Ayab esp32

    AllYarnsAreBeautiful/ayab-hardware

    Contains the schematics and layouts for the AYAB Arduino shield

    246 parts50CC-BY-SA-4.0
  • 4 layers72.4 × 44.4 mmBtmdpcb v04 eval, the printed circuit board in 3D

    Btmdpcb v04 eval

    17o2/bluetooth-minidisc

    Adding built-in bluetooth connectivity to a 20-year-old Mindisc player

    115 parts45
  • 2 layers29 × 27 mmUSB C-3-way splitter V5, the printed circuit board in 3D

    USB C-3-way splitter V5

    bluepylons/USB-C-3-way-splitter

    A splitter board (for making a cable splitter) for turning a 5V 3A USB power source to 3 5V 1A USB sources

    39 parts40MIT

Questions

What parts does the EV BMS Cell Protection use?

6 parts, built around the LM393. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the EV BMS Cell Protection KiCad files?

From the jimchantes/EV-BMS-Cell-Protection repository on GitHub, at the commit this page was made from: the board is Hardware/EV-BMS-Cell-Protection.kicad_pcb and its schematic Hardware/EV-BMS-Cell-Protection.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the EV BMS Cell Protection design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).