
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Bottom layer board providing mounting points and conversion capabilities
KeyboardTest is an open-source printed circuit board by jimbro1000, from the jimbro1000/Dragon3264KeyboardBase repository on GitHub, published under the MIT licence. It is a 2-layer board of 297.8 × 101.2 mm with 14 parts on 37 nets, routed with 101 tracks and 11 vias.
Its parts include 2 connectors and 1 IC. It belongs with the RP2040 boards of this library.
This project provides the design for a reproduction keyboard to fit the Dragon 32 and 64 home computers. The design here is a complement to the main keyboard PCB. This provides mounting points to the case and additional wiring to convert the board to the CoCo connector

The conversion works by letting the top board plugin vertically while letting the CoCo connector plugin underneath horizontally
To further increase functionality the plan is to add support to make the keyboard HID compliant by the addition of a cheap microcontroller board such as an arduino or a pico
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H3, H4, H5, H6, H7, H8, H9, H10, H11 |
| 2 | MountingHole | MountingHole:MountingHole_5.3mm_M5_ISO7380_Pad | H1, H2 |
| 1 | COCO_CONNECTION | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Horizontal | J2 |
| 1 | DRAGON_CONNECTION | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J1 |
| 1 | Pico | pico:RPi_Pico_SMD_TH | U1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 297.8 × 101.2 mm and has 2 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jimbro1000/Dragon3264KeyboardBase repository on GitHub, at the commit this page was made from: the board is keyboardTest.kicad_pcb and its schematic keyboardTest.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).