
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

Hard connector for SBC6309 core to peripheral board
SBC6309PeripheralLink is an open-source printed circuit board by jimbro1000, from the jimbro1000/SBC6309PeripheralLink repository on GitHub. It is a 2-layer board of 12.2 × 79.8 mm with 2 parts on 24 nets, routed with 38 tracks and 0 vias.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | ~ | Library:PeripheralInterface | M1, M2 |

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 12.2 × 79.8 mm and has 2 copper layers, 1.6 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jimbro1000/SBC6309PeripheralLink repository on GitHub, at the commit this page was made from: the board is SBC6309PeripheralLink.kicad_pcb and its schematic SBC6309PeripheralLink.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jimbro1000 before reusing the design.