
Headunit controls
Jimbo145/SaabHeadUnit
Integrates Ibus and LCD connections to Cat V cables for routing out of ICM

Integrates Ibus and LCD connections to Cat V cables for routing out of ICM
Headunit pi4 is an open-source printed circuit board by Jimbo145, from the Jimbo145/SaabHeadUnit repository on GitHub. It is a 2-layer board of 193.7 × 97.1 mm with 24 parts on 71 nets, routed with 468 tracks and 15 vias.
It is built around the TJA1051T. Its parts include 8 connectors, 4 ICs, 2 capacitors, 1 resistor and 1 switch.
The goal of this project is to create an alternate head unit option for the
Emulates slimmed down ICM button pcb
Integrates Ibus and LCD connections to Cat V cables for routing out of ICM
Pi4 mounting, Lifepowered, Microphone module, power input
Parts list Raspberry Pi LCD 3.5inch touchscreen 480*800 capacitive lifepo4wered-pi+ Can Bus Module Mcp2515
leighleighleigh Patrick Van Oosterwijck and LiFePO4wered Trionic Tuning
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 8P8C_LED_Shielded | CPlib:rj45breakout | J1, J2 |
| 2 | Battery_Cell | Battery:BatteryHolder_MPD_BH-18650-PC2 | BT1, BT2 |
| 2 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J6, J7 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 8Mhz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_02x02_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J5 |
| 1 | MCP2515-xSO | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U3 |
| 1 | MountingHole | CPlib:CPlogo2(50) | H5 |
| 1 | RASPBERRY_PI_4B_4GB | CPlib:MODULE_RASPBERRY_PI_4B_4GB_NOPIN | U1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | TJA1051T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | USB_B_Mini | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J8 |
| 1 | ~ | CPlib:LiFoPower | U4 |

Jimbo145/SaabHeadUnit
Integrates Ibus and LCD connections to Cat V cables for routing out of ICM

Jimbo145/SaabHeadUnit
Integrates Ibus and LCD connections to Cat V cables for routing out of ICM


zhbi98/ODriveX
【无刷电机FOC驱动器】双通道 FOC 无刷电机驱动套件,最高电压 60V 单通道电流可达 100A,可以驱动 1.2kW 以内 BLDC 或 PMSM(有中文注释)。


zhbi98/Motor42
【小型 42mm 伺服电机】支持 RS485 和 CAN 协议的闭环功能的步进电机,支持功率和通信级联(节点串联连接),适用于 3D 打印机,舵机,小型机械臂




CEJ2-Robotics/JO1_Electronics
This repository contains the PCB layout for a shield-style board designed to interface with the NUCLEO-H745ZI-Q development board.
It measures 193.7 × 97.1 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the TJA1051T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Jimbo145/SaabHeadUnit repository on GitHub, at the commit this page was made from: the board is circuit_boards/headunit_pi4/headunit_pi4.kicad_pcb and its schematic circuit_boards/headunit_controls/ICM_main_unit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Jimbo145 before reusing the design.