2 layers
2 layers
Usb night light basic
jichen-jay/gen_pcb- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 5
- Pads
- 17
- Tracks, vias
- 24, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Jul 2025
- Updated
- 7 Jul 2025
Overview
Usb night light basic is an open-source printed circuit board by jichen-jay, from the jichen-jay/gen_pcb repository on GitHub. It is a 2-layer board with 8 parts on 5 nets, routed with 24 tracks and 0 vias.
Its parts include 5 diodes, 1 resistor and 1 connector.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | LED | LED_THT:LED_D2.0mm_W4.0mm_H2.8mm_FlatTop | D1, D2, D3, D4, D5 |
| 1 | 10K | Potentiometer_THT:Potentiometer_Vishay_148-149_Single_Horizontal | RV2 |
| 1 | 62 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J1 |
Questions
What parts does the Usb night light basic use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Usb night light basic KiCad files?
From the jichen-jay/gen_pcb repository on GitHub, at the commit this page was made from: the board is usb_night_light_basic.kicad_pcb and its schematic light_controlled/light_controlled/light_controlled.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Usb night light basic design in my own project?
Its repository states no licence, so its author keeps all rights: ask jichen-jay before reusing the design.
More from jichen-jay/gen_pcb
2- 2 layers
Similar boards
- 2 layers20.5 × 24.8 mm
- 2 layers14.4 × 10.5 mm
OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm
Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm
USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm
7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm
PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm
PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0