
Nano
fellesverkstedet/fabricatable-machines
Motion systems for flexible digital fabrication and research. Easy to fabricate and customize. Documentation: https://github.com/fellesverkstedet/fabricatable-machines/wiki

A board that makes sure the dVRK controllers work before they are shipped.
Dvrk controller test board is an open-source printed circuit board by jhu-dvrk, from the jhu-dvrk/dvrk-controller-test-board repository on GitHub. It is a 2-layer board of 107.9 × 104.1 mm with 95 parts on 195 nets, routed with 406 tracks and 24 vias.
It is built around the DS2505, SFH6206-3T and DLM1-156R. Its parts include 83 resistors, 5 ICs, 4 diodes, 1 capacitor and 1 connector.
A board that makes sure the dVRK controllers work before they are shipped. It detects assembly issues:
dvrk-test-v1.2-jlcpcb.zip had PCB, BOM and assembly files. You can upload them to JLCPCB and they will assemble everything except the ITT Cannon connector and the STM32 dev board.
Read Assembly-Instructions.pdf.
You will need additional parts:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 77 | 1 Ohm | Resistor_SMD:R_2512_6332Metric | R1, R2, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27 +61 |
| 4 | 1kOhm | Resistor_SMD:R_0402_1005Metric | R9, R10, R11, R12 |
| 4 | LED | LED_SMD:LED_0402_1005Metric | D1, D2, D3, D4 |
| 1 | 1.8k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | DLM1-156 | dvrk:DLM1-Plug | J1 |
| 1 | DS2505 | dvrk:TSOC-6 | U7 |
| 1 | DS2505-TO92 | Package_TO_SOT_THT:TO-92_Inline | U8 |
| 1 | SFH6206-3T | Package_DIP:SMDIP-4_W9.53mm_Clearance8mm | U6 |
| 1 | STNucleo-432KC | dvrk:STNucleo32 | U1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP5 |
| 1 | TBD | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | UA9638CDR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |

fellesverkstedet/fabricatable-machines
Motion systems for flexible digital fabrication and research. Easy to fabricate and customize. Documentation: https://github.com/fellesverkstedet/fabricatable-machines/wiki


noahcroit/access_control_rp2zk
Firmware for Fail-secure door controller of access control room. Activate when power outage is occured.



ste2425/PSP-Bluetooth
Formerly PSP-Consolizer, PSP-Bluetooth aims to add Bluetooth controller support to the PSP 1K/2K/3K.


It measures 107.9 × 104.1 mm and has 2 copper layers, 1.6 mm thick.
95 parts, built around the DS2505, SFH6206-3T and DLM1-156R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jhu-dvrk/dvrk-controller-test-board repository on GitHub, at the commit this page was made from: the board is dvrk-controller-test-board.kicad_pcb and its schematic dvrk-controller-test-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jhu-dvrk before reusing the design.