Skip to the content
2 layers82 × 68 mm12v pico, the printed circuit board in 3D

A scratch project to explore stepper motor control

Size
82 × 68 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
41
Pads
166
Tracks, vias
104, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
16 Oct 2022
Updated
19 Oct 2026

Overview

12v pico is an open-source printed circuit board by jhmcaleely, from the jhmcaleely/stepper-playground repository on GitHub, published under the MIT licence. It is a 2-layer board of 82 × 68 mm with 17 parts on 41 nets, routed with 104 tracks and 0 vias.

Its parts include 6 connectors, 2 capacitors, 2 diodes, 1 IC and 1 switch. It belongs with the RP2040 boards of this library.

README

README.md

stepper-playground

A scratch project to explore stepper motor control

Currently depends on:

  • Pololu 2134, a carrier board for DRV8834 Stepper Driver
  • Raspberry Pi Pico
  • MicroPython

Parts

17
QtyValueFootprintReferences
1100uF, 25VCapacitor_THT:CP_Radial_D4.0mm_P2.00mmC1
11N4002Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1
11N5817Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD2
14.7uFCapacitor_THT:CP_Radial_Tantal_D4.5mm_P2.50mmC2
1Adafruit CAN PalConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ2
1DEBUGConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3
1LM7805_TO220Package_TO_SOT_THT:TO-220-3_VerticalU1
1MERG 12v CBUSTerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-4-3.5-H_1x04_P3.50mm_HorizontalJ1
1Pico LHSConnector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_VerticalJ5
1Pico RHSConnector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_VerticalJ6
1RESETButton_Switch_THT:SW_PUSH_6mmSW1
1RaspberryPi_PicoModule:RaspberryPi_Pico_SMD_HandSolderA1
1UART0Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ4

The 13 most common of 17 parts.

Similar boards

  • 2 layers50 × 35 mmServo power, the printed circuit board in 3D

    Servo power

    earthtojake/text-to-cad

    Design physical products with AI

    17 parts26kMIT
  • 2 layers139.7 × 62.2 mmBreakout 60pin EEC IV, the printed circuit board in 3D

    Breakout 60pin EEC IV

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    17 parts1.2k
  • 2 layers29.2 × 55.9 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    17 parts1kGPL-3.0
  • 2 layers24.5 × 36.5 mmCluster, the printed circuit board in 3D

    Cluster

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    17 parts993
  • 2 layers56.3 × 55.7 mmStarNecklace, the printed circuit board in 3D

    StarNecklace

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    17 parts915
  • 2 layers25 × 25 mmSmallEncoder, the printed circuit board in 3D

    SmallEncoder

    DDeGonge/OS-ARM

    This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…

    17 parts498MIT
  • 2 layers38.9 × 16.1 mmAmoeba spc, the printed circuit board in 3D

    Amoeba spc

    mtl/keyboard-pcbs

    Keyboard PCBs

    17 parts485
  • 2 layers36 × 51 mmABSIS ALE, the printed circuit board in 3D

    ABSIS ALE

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    17 parts431

Questions

How big is the 12v pico PCB?

It measures 82 × 68 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 12v pico use?

17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 12v pico KiCad files?

From the jhmcaleely/stepper-playground repository on GitHub, at the commit this page was made from: the board is 12v-pico/12v-pico.kicad_pcb and its schematic 12v-pico/12v-pico.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 12v pico design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).