

Onboard Vehicle PCB
PCB FIles and Code for Autonomous Vehicle
- Size
- 100 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 45
- Pads
- 92
- Tracks, vias
- 0, 0
- Pours
- 1
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Apr 2025
- Updated
- 9 Jun 2025
Overview
Onboard Vehicle PCB is an open-source printed circuit board by jhall8686, from the jhall8686/Integration-II-Project-weRobot repository on GitHub. It is a 2-layer board of 100 × 80 mm with 13 parts on 45 nets.
Its parts include 9 connectors, 2 resistors and 2 switches.
README
README.mdIntegration-II-Project-weRobot
PCB FIles and Code for Autonomous Vehicle
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 1 | 5V | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J8 |
| 1 | Calibration_Button | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | OUT-ARML | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | S3:0 (A) | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | S3:0 (L) | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | S3:0 (M) | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | S3:0 (R) | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Start_Button | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Teensy-Left | Connector_PinSocket_2.54mm:PinSocket_1x24_P2.54mm_Vertical | J1 |
| 1 | Teensy-Right | Connector_PinSocket_2.54mm:PinSocket_1x24_P2.54mm_Vertical | J2 |
Similar boards
- 2 layers40 × 20 mm

- 2 layers74.9 × 49.5 mm

- 2 layers35 × 29 mm

MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm

AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm

- 2 layers95 × 95 mm

Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm

Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0
Questions
How big is the Onboard Vehicle PCB PCB?
It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Onboard Vehicle PCB use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Onboard Vehicle PCB KiCad files?
From the jhall8686/Integration-II-Project-weRobot repository on GitHub, at the commit this page was made from: the board is KiCad/Onboard_Vehicle_PCB/Onboard_Vehicle_PCB.kicad_pcb and its schematic KiCad/Onboard_Vehicle_PCB/Onboard_Vehicle_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Onboard Vehicle PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask jhall8686 before reusing the design.