
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

A Micromouse Team PCB Rev1 is an open-source printed circuit board by jgreen124, from the jgreen124/Micromouse-PCB repository on GitHub. It is a 2-layer board of 66 × 126 mm with 21 parts on 58 nets.
Its parts include 11 connectors, 6 resistors, 3 ICs and 1 switch. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R_US | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 2 | Battery | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J9, J13 |
| 2 | MotorCageMount | micromouseFootprintLibrary:motorMount | J11, J12 |
| 1 | 5V->12V | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J10 |
| 1 | IMU | MicromouseLibaryNew:MODULE_4754 | U2 |
| 1 | Motor1 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J5 |
| 1 | Motor2 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J6 |
| 1 | MotorController | MicromouseLibaryNew:MotorController | U3 |
| 1 | NeoPixel | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | SW_DIP_x06 | Package_DIP:DIP-12_W7.62mm | SW1 |
| 1 | TOF1 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J8 |
| 1 | TOF2 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | TOF3 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | Teensy4.0 | MicromouseLibaryNew:Teensy40 | U1 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.


It measures 66 × 126 mm and has 2 copper layers, 1.6 mm thick.
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jgreen124/Micromouse-PCB repository on GitHub, at the commit this page was made from: the board is A_Micromouse_Team_PCB_Rev1.kicad_pcb and its schematic A_Micromouse_Team_PCB_Rev1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jgreen124 before reusing the design.