Skip to the content
2 layers66 × 126 mmA Micromouse Team PCB Rev1, the printed circuit board in 3D

A Micromouse Team PCB Rev1

jgreen124/Micromouse-PCB
Size
66 × 126 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
58
Pads
151
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 8.0 (file 20240108)
Created
24 Jan 2024
Updated
5 Jun 2024

Overview

A Micromouse Team PCB Rev1 is an open-source printed circuit board by jgreen124, from the jgreen124/Micromouse-PCB repository on GitHub. It is a 2-layer board of 66 × 126 mm with 21 parts on 58 nets.

Its parts include 11 connectors, 6 resistors, 3 ICs and 1 switch. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.

Parts

21
QtyValueFootprintReferences
6R_USResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR1, R2, R3, R4, R5, R6
2BatteryConnector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_VerticalJ9, J13
2MotorCageMountmicromouseFootprintLibrary:motorMountJ11, J12
15V->12VConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ10
1IMUMicromouseLibaryNew:MODULE_4754U2
1Motor1Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ5
1Motor2Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ6
1MotorControllerMicromouseLibaryNew:MotorControllerU3
1NeoPixelConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ7
1SW_DIP_x06Package_DIP:DIP-12_W7.62mmSW1
1TOF1Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ8
1TOF2Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ1
1TOF3Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ2
1Teensy4.0MicromouseLibaryNew:Teensy40U1

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

How big is the A Micromouse Team PCB Rev1 PCB?

It measures 66 × 126 mm and has 2 copper layers, 1.6 mm thick.

What parts does the A Micromouse Team PCB Rev1 use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the A Micromouse Team PCB Rev1 KiCad files?

From the jgreen124/Micromouse-PCB repository on GitHub, at the commit this page was made from: the board is A_Micromouse_Team_PCB_Rev1.kicad_pcb and its schematic A_Micromouse_Team_PCB_Rev1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the A Micromouse Team PCB Rev1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask jgreen124 before reusing the design.