2 layers159.5 × 53.3 mm
2 layers104.1 × 70 mm
Arcade led controller v2
jgolding-dev/arcade-led-control- Size
- 104.1 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 934
- Nets
- 114
- Pads
- 1,214
- Tracks, vias
- 539, 60
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 23 Dec 2025
- Updated
- 31 Oct 2026
Overview
Arcade led controller v2 is an open-source printed circuit board by jgolding-dev, from the jgolding-dev/arcade-led-control repository on GitHub. It is a 2-layer board of 104.1 × 70 mm with 934 parts on 114 nets, routed with 539 tracks and 60 vias.
It is built around the 74AHCT125D, WS2811 and WS2812B, with the PN2222A among its other parts. Its parts include 20 resistors, 10 connectors, 7 transistors, 3 ICs and 2 capacitors. It belongs with the retro computing and games boards and the RP2040 boards of this library.
Main components
4
74AHCT125D
SOP-14-40℃~+125℃ 1 4 4.3ns@5V,50pF 4.5V~5.5V 40uA 74AHCT 8mA 8mA Schmitt trigger Tri-State Unidirectional SOP-14 Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffer/Driver/Transceiver
WS2811
SOP-8-25℃~+85℃ 16.5mA 20V 3 5V~24V 800kHz Over Voltage Protection、Short-Circuit Protection PWM SOP-8 LED Drivers ROHSWorldsemiLED Drivers
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
PN2222A
TO-92-3-55℃~+150℃ 1 NPN 1A 300MHz 300mV 40V 625mW NPN TO-92-3 Bipolar (BJT) ROHSNTE ElectronicsBipolar (BJT)
Parts
934| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | LED | LED_THT:LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O3.81mm_Z1.6mm | P1_DP_JOY_MODE_LED1, P1_LS_JOY_MODE_LED1, P1_RS_JOY_MODE_LED1, P2_DP_JOY_MODE_LED1, P2_LS_JOY_MODE_LED1, P2_RS_JOY_MODE_LED1, REC_LED1 |
| 7 | WS2812B | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | OPTIONS_BUTTONS_LED1, P1_BALLTOP_LED_1, P1_BUTTONS_LED1, P1_JOYSTICK_LED1, P2_BALLTOP_LED_1, P2_BUTTONS_LED1, P2_JOYSTICK_LED1 |
| 6 | 330Ω | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R330[1]1, R330[1]2, R330[2]1, R330[3]2, R330[4]1, R330[4]2 |
| 4 | 10kΩ | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R10k_1, R10k_2, R10k_3, R10k_4 |
| 4 | 1kΩ | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1k_1, R1k_2, R1k_3, R1k_4 |
| 4 | PN2222A | Package_TO_SOT_THT:TO-92_Inline_Wide | Q4(PN2222)1, Q5(PN222)1, Q6(PN2222)1, Q7(PN2222)1 |
| 4 | Screw_Terminal_01x12 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-12-2.54_1x12_P2.54mm_Horizontal | ST_IN_01x1_1, ST_IN_01x1_2, ST_OUT_01x12_1, ST_OUT_01x12_2 |
| 3 | 100kΩ | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R100k_1, R100k_2, R100k_3 |
| 3 | 220Ω | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R220[1]1, R220[2]1, R220[3]1 |
| 3 | Q_NMOS_GDS | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3 |
| 2 | 74AHCT125 | Package_DIP:DIP-14_W7.62mm | U1, U2 |
| 2 | C | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2 |
| 2 | Conn_01x05_Pin | TerminalBlock_WAGO:TerminalBlock_WAGO_233-505_2x05_P2.54mm | +12V_BUS_1, +12V_BUS_2 |
| 2 | Conn_01x05_Pin | Connector_Wago:Wago_734-165_1x05_P3.50mm_Horizontal | +5V_BUS_1, +5V_BUS_2 |
| 2 | Screw_Terminal_01x05 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | ST_IN_01x5, ST_OUT_01x5 |
| 1 | ATX-24 | Connector_Molex:Molex_Mini-Fit_Jr_5566-24A_2x12_P4.20mm_Vertical | ATX_PSU_1 |
| 1 | EA_DOGL128X-6 | Display:EA_DOGL128-6 | U3 |
| 1 | GND_BUS_1 | TerminalBlock_WAGO:TerminalBlock_WAGO_233-506_2x06_P2.54mm | J1 |
| 1 | GND_BUS_2 | TerminalBlock_WAGO:TerminalBlock_WAGO_233-504_2x04_P2.54mm | J2 |
| 1 | PSU_GND_BUS | Connector_Wago:Wago_734-163_1x03_P3.50mm_Horizontal | J3 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_THT | A1 |
| 1 | WS2811 | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | ACCENT_LED1 |
The 62 most common of 934 parts.
Questions
How big is the Arcade led controller v2 PCB?
It measures 104.1 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Arcade led controller v2 use?
934 parts, built around the 74AHCT125D, WS2811, WS2812B and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arcade led controller v2 KiCad files?
From the jgolding-dev/arcade-led-control repository on GitHub, at the commit this page was made from: the board is schematic/arcade_led_controller_v2/arcade_led_controller_v2.kicad_pcb and its schematic schematic/arcade_led_controller_v2/arcade_led_controller_v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arcade led controller v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jgolding-dev before reusing the design.
Similar boards
- 2 layers45.8 × 24.9 mm
Tape tics projectV2
carlos-paniagua/TapeTicsProject
This repository contains the hardware and software design files for TapeTics
17 parts2MIT - 2 layers163.8 × 116.8 mm
- 2 layers60.9 × 111.8 mm
- 2 layers75.5 × 71 mm
- 2 layers152.4 × 81.3 mm
LEDCube ESP32-C6 V2
97Cweb/Old-LEDCube
All the files from the LEDCube project, save for the library
59 parts - 2 layers58 × 81.7 mm
KICAD RECEPTEUR FINAL
badrbcb0405/Projet-1A-EMETTEUR-RECEPTEUR-IR
Embedded STM32 project based on two Nucleo-compatible shields: an IR remote shield and an IR receiver LED shield.
22 parts - 4 layers90 × 77.9 mm
Lighting Tile Circuit V3
OA-Designs/LED-TILE
Modular decorative LED tiles in multiple shapes (hex, square, triangle...) sharing one PCB design. Tiles connect edge-to-edge to share power and sync lighting effects across a network.
77 partsGPL-3.0