
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

Breakout board for PMW3360 optical mouse sensor
PMW3360 is an open-source printed circuit board by jfedor2, from the jfedor2/pmw3360-breakout repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 22 × 34 mm with 12 parts on 17 nets, routed with 85 tracks and 2 vias.
Its parts include 3 capacitors, 2 resistors, 2 ICs and 1 connector. It belongs with the sensors and measurement and interfaces and adapters boards of this library.
This repository contains PCB design files for a breakout board for the PMW3360 optical mouse sensor.
The board doesn't do any level shifting so it only works with 3.3V logic.
The dimensions of the board are 22x34mm and the mounting holes are for M2 screws.
The files in the fabrication folder can be used to order this board from JLCPCB with SMT assembly. The board you get includes everything except the actual sensor. If some of the specific components are out of stock, try to find an equivalent with the same package and parameters.
The sensor chip should be soldered on the top side (the side where all the other components are). The dot marks pin 1. The optic goes on the bottom side.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 39 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | PMW3360 | PMW3360:PMW3360 | U1 |
| 1 | TCR2EF19 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
The 8 most common of 12 parts.

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 22 × 34 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jfedor2/pmw3360-breakout repository on GitHub, at the commit this page was made from: the board is kicad/PMW3360.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).