
Controller Connector
benanderman/spork-8
An 8-bit CPU, made with TTL chips on custom, modular PCBs. Includes board designs, and Arduino code to program its instruction set and programs.

HAT1 is an open-source printed circuit board by jfdoolster, from the jfdoolster/jfd_kicad_public repository on GitHub. It is a 2-layer board of 61 × 55.9 mm with 12 parts on 40 nets, routed with 127 tracks and 4 vias.
It is built around the RJE0166001. Its parts include 7 connectors and 1 resistor.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | RJE0166001 | RJE0166001:AMPHENOL_RJE0166001 | J3, J4 |
| 1 | 4.7k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | AD5754 | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | J2 |
| 1 | Debug | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | Fan | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Jumper_NC_Small | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP3 |
| 1 | Power_1Wire | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | Power_Fan | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | Power_Out | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J6 |
| 1 | RaspberryPi | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
The 11 most common of 12 parts.

benanderman/spork-8
An 8-bit CPU, made with TTL chips on custom, modular PCBs. Includes board designs, and Arduino code to program its instruction set and programs.

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
It measures 61 × 55.9 mm and has 2 copper layers, 1.6 mm thick.
12 parts, built around the RJE0166001. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jfdoolster/jfd_kicad_public repository on GitHub, at the commit this page was made from: the board is mroi_rpi_dac/HAT1.kicad_pcb and its schematic mroi_rpi_dac/HAT1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jfdoolster before reusing the design.