jessedeuel/led_matrixLed matrix is an open-source printed circuit board by jessedeuel, from the jessedeuel/led_matrix repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 132.1 × 132.1 mm with 578 parts on 312 nets, routed with 1,937 tracks and 1,644 vias.
It is built around the ESP32-C6-WROOM-1-N4, CH224K and TPS53318DQPR, with the AMS1117-3.3, SN74LVC1T45DBVRE4 and 293D337X9010E2TE3 among its other parts. Its parts include 278 capacitors, 260 diodes, 27 resistors, 5 ICs and 3 connectors. It belongs with the lEDs and displays boards and the ESP32 and RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 258 | 10uF | led_matrix:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C10, C11, C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112 +242 |
| 256 | ~ | led_matrix:XL-5050RGBC-WS2812B-S | D1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +240 |
| 9 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R11, R12, R13, R14, R21, R28, R29, R30 |
| 5 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R16, R17, R22, R23 |
| 5 | 22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C262, C263, C264, C274, C276 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C257, C258, C261 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C267, C268 |
| 2 | 105k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R5 |
| 2 | 200 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R26, R27 |
| 2 | 220uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C270, C271 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C272, C273 |
| 2 | 330uF | led_matrix:CAP_293D_E_VIS-L | C277, C278 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Right | J1, J2 |
| 2 | RED | led_matrix:LED0603-RD | LED1, LED2 |
| 2 | ~ | led_matrix:SOD-523_L1.2-W0.8-LS1.6-BI | D257, D258 |
| 1 | 1.82k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 1.8k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R25 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C260 |
| 1 | 124k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 12k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R24 |
| 1 | 1nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C269 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C266 |
| 1 | 237k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 32.768kHz | led_matrix:FC-135R_L3.2-W1.5 | X1 |
| 1 | 4.7uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C265 |
| 1 | 4.7uH | led_matrix:IND_BOURNS_SRP1250-L | L1 |
| 1 | 71.5k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 86.6k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | AMS1117-3.3 | led_matrix:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR | U1 |
| 1 | CH224K | led_matrix:ESSOP-10_L4.9-W3.9-P1.0-LS6.0-TL-EP | U5 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical_SMD_Pin1Right | J3 |
| 1 | ESP32-C6-WROOM-1-N4 | led_matrix:MOD28_ESP32-C6-WROOM-1_EXP | U2 |
| 1 | SN74LVC1T45DBVR | led_matrix:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR | U6 |
| 1 | TPS53318DQPR | led_matrix:LSON-CLIP-22_L6.0-W5.0-P0.50-BL-EP | U4 |
| 1 | TS1187A26017 | led_matrix:SW-SMD_4P-L5.2-W5.2-P3.70-LS6.4 | SW1 |
| 1 | ~ | led_matrix:DC-IN-TH_DC-005-5A-2.0-SMT | DC1 |
| 1 | ~ | led_matrix:USB-C-SMD_GT-USB-7047A | USB1 |
Biswajitpattanaik07/6_Axis_Robot_Controller
Axion is an open-source controller board for a 6-axis articulated robot arm. It is built around an STM32F103C8T6 and combines six servo outputs, six per-joint IMU inputs, and three ways to talk to the outside world…
afewyards/HydroMix
A mains-powered, Zigbee-connected controller for a hydronic 3-way mixing valve — it regulates the supply-water temperature of a floor heating/cooling system and keeps regulating autonomously if the Zigbee link goes down.
It measures 132.1 × 132.1 mm and has 2 copper layers, 1.61 mm thick.
578 parts, built around the ESP32-C6-WROOM-1-N4, CH224K, TPS53318DQPR and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jessedeuel/led_matrix repository on GitHub, at the commit this page was made from: the board is board/led_matrix.kicad_pcb and its schematic board/MCU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).