2 layers95.5 × 99.8 mm
2 layers79.5 × 70 mm
PartMiddle
jeru/MyLeverlessLeverless controller for keyboard-only games.
- Size
- 79.5 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 7
- Pads
- 71
- Tracks, vias
- 44, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 May 2025
- Updated
- 23 May 2025
Overview
PartMiddle is an open-source printed circuit board by jeru, from the jeru/MyLeverless repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 79.5 × 70 mm with 14 parts on 7 nets, routed with 44 tracks and 2 vias.
Its parts include 6 switches and 2 connectors.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4, H5, H6 |
| 6 | SW_Push | KeySwitches:SW_MX_HotSwap_PTH | SW1, SW2, SW3, SW4, SW5, SW6 |
| 1 | Middle | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Horizontal | J2 |
| 1 | MiddleHalf | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J1 |
More from jeru/MyLeverless
2- 2 layers86.5 × 63.5 mm
Similar boards
- 2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
Questions
How big is the PartMiddle PCB?
It measures 79.5 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PartMiddle use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PartMiddle KiCad files?
From the jeru/MyLeverless repository on GitHub, at the commit this page was made from: the board is PartMiddle/PartMiddle.kicad_pcb and its schematic PartLeft/PartLeft.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PartMiddle design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).