
RD40 display V1
lhm0/rotating_display
A DIY 40 LED rotating display with Arduino nano and ESP-01s microcontrollers

BikeComputer is an open-source printed circuit board by jeremypoulter, from the jeremypoulter/BikeComputer repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 45.7 × 48.3 mm with 26 parts on 22 nets.
It is built around the ATMEGA328-PU and A3144. Its parts include 7 capacitors, 6 resistors, 4 ICs, 3 connectors and 3 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | R | Resistors_SMD:R_0603_HandSoldering | R1, R2, R3, R4, R6 |
| 3 | C | Capacitors_SMD:C_0603_HandSoldering | C2, C6, C7 |
| 3 | SW_PUSH | Buttons_Switches_ThroughHole:SW_PUSH | SW1, SW2, SW3 |
| 2 | 0.1uF | Capacitors_SMD:C_0603_HandSoldering | C8, C9 |
| 2 | 22pF | Capacitors_SMD:C_0603_HandSoldering | C4, C5 |
| 2 | LED | LEDs:LED_0603 | D1, D2 |
| 1 | 10K | Resistors_SMD:R_0603_HandSoldering | R5 |
| 1 | A3144 | Pin_Headers:Pin_Header_Straight_1x03 | U5 |
| 1 | ATMEGA328-P | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | IC1 |
| 1 | Batt | Pin_Headers:Pin_Header_Straight_1x02 | P3 |
| 1 | Crystal 16MHz | Crystals:Crystal_HC50-U_Vertical | Y1 |
| 1 | ISP | Pin_Headers:Pin_Header_Straight_2x03 | U2 |
| 1 | LP298X | TO_SOT_Packages_SMD:SOT-23-5 | U3 |
| 1 | OLED screen | Socket_Strips:Socket_Strip_Straight_1x07 | P2 |
| 1 | Serial | Pin_Headers:Pin_Header_Straight_1x06 | P1 |

lhm0/rotating_display
A DIY 40 LED rotating display with Arduino nano and ESP-01s microcontrollers

CoraBeanz/linescan-hyperspectral-splatting
A homebuilt pushbroom spectrograph rides a robot arm, and the 3D Gaussian splat it trains stores a full 500–950 nm spectrum in every Gaussian instead of an RGB color.

aaronluebbert/ChessLink
houses code from our Microcontroller Project Lab from Summer 2026 at TTU


adeludedperson/smart-chessboard
DIY smart chessboard: 64 Hall-effect sensors, ESP32, web app with engine + Lichess online play

Aitthikit/POV_Display_PCB
ที่ 2000 RPM: - 33 รอบ/วินาที = 33 FPS - 240 พิกเซลต่อรอบ - 125 µs ต่อพิกเซล


dani0421/Compostaje
El SDA se conecta al pin 33 del ESP32 y el SCL al pin 36 de ESP32, cabe resaltar que en la placa no quedaran orificios para la pantalla, unicamente los pines para hacer la conexión.
It measures 45.7 × 48.3 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the ATMEGA328-PU and A3144. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jeremypoulter/BikeComputer repository on GitHub, at the commit this page was made from: the board is BikeComputer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).