
Piccolo mini
JeJeff/piccolo
Five key mechanical keyboard video conference macropad with optional rotary encoder and OLED display.

Five key mechanical keyboard video conference macropad with optional rotary encoder and OLED display.
Piccolo is an open-source printed circuit board by JeJeff, from the JeJeff/piccolo repository on GitHub. It is a 2-layer board of 136.6 × 20.6 mm with 17 parts on 27 nets, routed with 144 tracks and 7 vias.
Its parts include 5 diodes and 1 IC. It belongs with the keyboards and input and lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
Piccolo Macropad is intended for video conference control. Setup by default for Zoom, it could be used to Teams, Webex, or anything else with keyboard shortcuts just by changing the keymapping.
| Reference | Item | Quantity | Notes |
|---|---|---|---|
| Plates | |||
| PCB | 1 | ||
| Switchplate | 1 | ||
| Backplate | 1 | ||
| Components to solder | |||
| MX1-MX5 | Hotswap sockets | 4-5 | |
| ENC1 | EC11 Rotary Encoder | 0-1 | Optional, replaces MX5. |
| D1-D5 | 1N4148 Diode | 5 | Both SMD (SOD-123) and through hole (DO-35) supported. |
| U1 | Pro Micro | 1 | Or pin compatible controller. |
| U1 | 12x1 male pin header | 2 | For the pro micro. |
| OLED1 | 0.91" OLED screen | 1 | If you don't want the screen, consider using the Piccolo Mini instead. |
| OLED1 | 4x1 male pin header | 1 | For the OLED screen. |
| Hardware | |||
| M2 standoff 12mm | 3 | Max diameter 3.7mm, required when using back- and switch-plates. | |
| M2 x 6mm flat head screw | 6 | Button head screws also work, could go as short as 4mm. | |
| Rubber feet 8mm | 4 | ||
| Keys and Knobs | |||
| MX Switches | 4-5 | ||
| Keycaps | 4-5 | Relegendable caps recommended, but the choice is yours | |
| Encoder knob | 0-1 | Matching the encoder, max diameter 18mm |

The Piccolo Macropad and Piccolo Mini Macropad are licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
If you have built upon this work and have changed the design in a significant way, the non-commercial clause can be waived. If you have developed your own design using files in this repository and would like to sell it, please create an issue to discuss it. I fully support those looking to make new things and be creative and will more than likely approve and support your project.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | D_Small | Envoy:Diode-Hybrid-Back | D1, D2, D3, D4, D5 |
| 5 | MX-NoLED | Envoy:MXOnly-1U-Hotswap | MX1, MX2, MX3, MX4, MX5 |
| 3 | MountingHole | Envoy:ClearanceHole_3.7mm | H1, H2, H3 |
| 1 | OLED | kbd:OLED_v2 | OL1 |
| 1 | ProMicro | Envoy:ProMicro_face_in | U1 |
| 1 | Rotary_Encoder_Switch | Keebio-Parts:RotaryEncoder_EC11-no-legs | ENC1 |
| 1 | SW_Push | Envoy:Reset_Jumper_Points | RESET1 |

JeJeff/piccolo
Five key mechanical keyboard video conference macropad with optional rotary encoder and OLED display.



hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…


It measures 136.6 × 20.6 mm and has 2 copper layers, 1.6 mm thick.
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JeJeff/piccolo repository on GitHub, at the commit this page was made from: the board is piccolo/piccolo.kicad_pcb and its schematic piccolo-mini/piccolo-mini.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JeJeff before reusing the design.