Skip to the content
2 layers16.2 × 16.2 mmCPLD Replacement, the printed circuit board in 3D

In-depth Info & Mods for Quantum3D Obsidian2 Voodoo 2 Card

Size
16.2 × 16.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
71
Pads
112
Tracks, vias
79, 16
Pours
40
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
7 Nov 2024
Updated
21 Nov 2024

Overview

CPLD Replacement is an open-source printed circuit board by jeffqchen, from the jeffqchen/quantum3d_obsidian2_voodoo2_info repository on GitHub. It is a 2-layer board of 16.2 × 16.2 mm with 6 parts on 71 nets, routed with 79 tracks and 16 vias.

Its parts include 3 resistors, 1 capacitor and 1 IC. It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.

README

README.md

Quantum3D Obsidian2 Arcade Voodoo2 Info

q3d_cover

I have luckily obtained TWO Quantum3D Obsidian2 arcade Voodoo2 cards from a kind eBay seller. They were both broken, so I spend a few weeks investigating and fixing them up, plus designing upgrades to enhance its functionalities. I hope my work will help some of you repair and make your Q3D cards work better.

Add-on Projects

I have designed the following mods for this card.

  • VGA Input Board
  • U21 Xilinx CPLD Replacement
  • SLI Bridge. Both rigid & ribbon type
  • Protective Armor

VGA Input Board

The Q3D arcade card does not come with a VGA input like a retail Voodoo 2 card. However, it has a pin header footprint on the PCB for that purpose.

I have designed a PCB to plug into the pin header, so you can add a VGA male port, plug in the VGA output of your 2D video card via that Voodoo passthrough cable.

U21 Xilinx CPLD Replacement

The U21 chip, a Xilinx CPLD, controls mainly sync signals that's output to the VGA output.

There seems to be a few situations wit this chip.

  • Some arcade boards come with a security setup and this chip won't function as-is.
  • Sometimes this Xilinx chip dies, and you won't have any video output on the screen.

Both situations will render the card useless. I designed a simple logic circuit to function similarly to the unlocked Xilinx CPLD.

SLI Bridge

This card can do SLI! However you need to add in a few missing components before that. With that part taken care of, I've come up with a rigid SLI bridge board that helps you SLI two of these same cards, or with a reference card. The info on how to create a ribbon type cable will also be available.

Protective Armor

This set of 3D printed armor will protect sensitive SMD components and improve handling of the card, while making the card look way more nicer. It wouldn't hurt to try!

Mods

Solder on 2MB of EDO RAM chips to the FBI on the back of the card to make it a 12MB Voodoo 2.

Restore picture brightness to the full PC standard.

All information is available in the Project Wiki pages.

Parts

6
QtyValueFootprintReferences
26K8Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2, R3
10.1uF 16VResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderC1
12K2Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
1CD74HC4053PWRQuantum3D Voodoo2:CD74HC4053PWRU1
1PLCC FootprintQuantum3D Voodoo2:CPLD_Replacement_44E1

More from jeffqchen/quantum3d_obsidian2_voodoo2_info

2
  • 2 layers52.9 × 45.1 mmSLI Interconnect PCB, the printed circuit board in 3D

    SLI Interconnect PCB

    jeffqchen/quantum3d_obsidian2_voodoo2_info

    In-depth Info & Mods for Quantum3D Obsidian2 Voodoo 2 Card

    4 parts5
  • 2 layers20.3 × 34 mmVGA Input Board, the printed circuit board in 3D

    VGA Input Board

    jeffqchen/quantum3d_obsidian2_voodoo2_info

    In-depth Info & Mods for Quantum3D Obsidian2 Voodoo 2 Card

    2 parts5

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

How big is the CPLD Replacement PCB?

It measures 16.2 × 16.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the CPLD Replacement use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CPLD Replacement KiCad files?

From the jeffqchen/quantum3d_obsidian2_voodoo2_info repository on GitHub, at the commit this page was made from: the board is Xilinx CPLD Replacement/KiCAD/CPLD Replacement.kicad_pcb and its schematic SLI Bridge/KiCAD/SLI Interconnect PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the CPLD Replacement design in my own project?

Its repository states no licence, so its author keeps all rights: ask jeffqchen before reusing the design.