
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

RGBS SCART docks for the RetroTINK 5X
VGA2RT5X is an open-source printed circuit board by jeffqchen, from the jeffqchen/RetroTINK-5X-SCART-Dock repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 43.5 × 14.5 mm with 7 parts on 13 nets, routed with 63 tracks and 7 vias.
Its parts include 3 connectors, 2 capacitors and 1 resistor. It belongs with the lEDs and displays boards of this library.
Mike Chi's RetroTINK 5X Pro is a blessing to the entire retro-gaming community. However the SCART port on the 5X has its issue, not to mention that nobody has any love left for the SCART standard itself. Personally, I'm also a fan of vertical stands for my devices. So here's my approach to tackle the matters.
This dock system puts the RetroTINK 5X into a vertical standing position. It taps into the SCART port, so RGBS + audio signals could be fed into the 5X, while providing extra stability.
There are two version of the dock. One that uses the standard BNC and 3.5mm audio headers, and the other that makes use of my VGA RGBS + audio pinout standard.



If you are bothered by the single LED inside the RetroTINK 5X, here is a 3D-printed light diffuser that fixes it.
https://www.thingiverse.com/thing:4981210
Mike Chi, creator of the RetroTINK 5X. Helped me in various aspects of this project as well.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | SMD_CAP_0603 | VGA2RT5X:SMD_Cap_0603 | C1, C2 |
| 1 | 3.5mm_vertical | VGA2RT5X:3.5mm_Jack_5p | J1 |
| 1 | OUT_PADS | VGA2RT5X:Output_Pads | P2 |
| 1 | Resistor_0603 | VGA2RT5X:Resistor_0603 | R1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | VGA | VGA2RT5X:VGA_female_rightangle_slim | P1 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 43.5 × 14.5 mm and has 2 copper layers, 1.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jeffqchen/RetroTINK-5X-SCART-Dock repository on GitHub, at the commit this page was made from: the board is VGA_Dock/KiCAD/VGA2RT5X/VGA2RT5X.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).