
XIAO ESP32C3 v1.3
jeffmc6767/Blare-clock
This is my alarm clock with a display, buzzer and 4 buttons to customize it.

This is my alarm clock with a display, buzzer and 4 buttons to customize it.
Blare is an open-source printed circuit board by jeffmc6767, from the jeffmc6767/Blare-clock repository on GitHub. It is a 2-layer board of 77.4 × 45.4 mm with 11 parts on 23 nets, routed with 79 tracks and 17 vias.
Its parts include 4 switches, 1 IC and 1 connector. It belongs with the ESP32 boards of this library.
This is my alarm clock with a display, buzzer and 4 buttons to customize it.
My case:
My PCB:
BOM:
1x PCB: 5$ 1x Seeed XIAO ESP32C3 4x MX-Style Keyboard Switches 4x White Blank DSA Keycaps 0x Through-Hole 1N4148 Diodes 1x 2.25in TFT Screen 1x 3.3V Piezo Buzzer 1x 2.54mm 8 Pin Male Header (For connecting your screen) 8x 20cm Female-Female Jumper Wires (For connecting your screen off of the pcb) 4x M3x5x4 Heatset Inserts 4x M3x8mm Screws 4x M3x16mm Screws
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | SW_Push | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_1.00u_PCB-Gateron-KS-3x switch | SW1, SW2, SW3, SW4 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | XIAO-ESP32-S3-SMD | Seeed_Studio_XIAO_Series:XIAO-ESP32-S3-SMD | U1 |

jeffmc6767/Blare-clock
This is my alarm clock with a display, buzzer and 4 buttons to customize it.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
It measures 77.4 × 45.4 mm and has 2 copper layers, 1.6 mm thick.
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jeffmc6767/Blare-clock repository on GitHub, at the commit this page was made from: the board is PCB/Blare.kicad_pcb and its schematic PCB/Blare.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jeffmc6767 before reusing the design.