Skip to the content
2 layers67.9 × 61.7 mmSvp adapter board, the printed circuit board in 3D

Svp adapter board

jdesiloniz/svpdev97

A collection of development tools targetting SEGA's SVP chip found in the Mega Drive/Genesis version of Virtua Racing.

Size
67.9 × 61.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
2
Nets
43
Pads
88
Tracks, vias
294, 1
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
6 Jul 2019
Updated
20 Mar 2022

Overview

Svp adapter board is an open-source printed circuit board by jdesiloniz, from the jdesiloniz/svpdev repository on GitHub, published under the MIT licence. It is a 2-layer board of 67.9 × 61.7 mm with 2 parts on 43 nets, routed with 294 tracks and 1 via.

It belongs with the retro computing and games and interfaces and adapters boards of this library.

README

boards/svp-eprom-board/README.md

SVP EPROM board

SVP EPROM board

This board attaches to the SVP adapter board and allows feeding code to the SVP from a 27C160 EPROM (or probably from any pin-compatible EEPROM like the MX29F1615PC-10 by Macronix - not tested).

Designed with KiCAD 5.1.

Components

Even though the board is just rewiring the original ROM pins in the cartridge to the pinout of the EPROM, I added the following passive devices for good measure:

  • 1x 4.7uf electrolytic capacitor.
  • 1x 0.1uf (0603 package) SMD ceramic capacitor.
  • 1x 0ohm resistor (1206 package).
  • 1x DIP42 socket.
  • 1x 44-pin header male connector (2.54mm pitch).
  • Test points (optional).

I guess the bypass capacitors could be optional but the resistor is required. Anyway these are chip and not that hard to solder so please use them :).

Regarding the DIP42 socket, if you can't find these in your area just using a couple of smaller sockets (i.e.: two DIP24 sockets and cutting the extra pins from one of them) should do the trick.

There's also connectors for test pins. You probably don't need to do anything with these, but I plan to use them to measure access speeds from the SVP with my oscilloscope. But the EPROM will work just fine without them in the board.

EPROM speeds

From what can be seen in Virtua Racing prototype boards, the SVP was meant to be used with ROMs with an access speed of 120ns or faster. The EPROMs that I used with these (27C160-100) have an access time of 100ns and they ran Virtua Racing without issues.

Manufacturing

Any PCB manufacturer for hobbyists should be able to build this board.

Mounting

There's not much to this board really. Just be careful with the bigger bypass capacitor polarity, and placing the EPROM in the right position.

License

The designs for these boards is open source and MIT-licensed. Also take into account the following conditions of use:

  • Please use these tools for good. Also for fun. But good fun, not evil fun.
  • Messing with real hardware is risky. By using these boards you are responsible for any potential issues you might find while using these designs.
  • If you build something really cool (moderately cool also works for me) using these boards please drop a comment at taiyou[at]gmail.com.
  • You're not forced, but if you use these boards in your own projects I'd appreciate if you could acknowledge me :).

"Designed under the sun of Cadiz"

You'll find that most of my boards here have this text somewhere in their layout. I was born in Cádiz, the southernmost city in Spain (and the oldest city in Western Europe). It's not a city that's usually associated to technology or these kind of projects so for me it's really important that cool things some of us do here related to tech are considered as part of the legacy of this town too. These designs are open source so you're free to modify them at your will, but I'd ask you kindly not to remove this label if you will. Please help us to spread the name of our wonderful city all around the tech world!

Parts

2
QtyValueFootprintReferences
1ROM_CONN_COUNTER_CLOCKWISEConnector_PinSocket_2.54mm:PinSocket_2x22_P2.54mm_VerticalU1
1ROM_PINSsvp-adapter-board:VR_ROM_CASTELLU2

More from jdesiloniz/svpdev

2
  • 2 layers71.4 × 47 mmSvp eeprom board, the printed circuit board in 3D

    Svp eeprom board

    jdesiloniz/svpdev

    A collection of development tools targetting SEGA's SVP chip found in the Mega Drive/Genesis version of Virtua Racing.

    6 parts97MIT
  • 2 layers50.8 × 61 mmRom access board, the printed circuit board in 3D

    Rom access board

    jdesiloniz/svpdev

    A collection of development tools targetting SEGA's SVP chip found in the Mega Drive/Genesis version of Virtua Racing.

    3 parts97MIT

Similar boards

  • 2 layers37 × 19 mmPassive rpi hub75-adapter, the printed circuit board in 3D

    Passive rpi hub75-adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    2 parts4.4kGPL-2.0
  • 2 layersDiode template, the printed circuit board in 3D

    Diode template

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    2 parts547GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 button, the printed circuit board in 3D

    L0 button

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    2 parts546MIT
  • 2 layers35.1 × 46.8 mmSDEX2M2 Breakout Board, the printed circuit board in 3D

    SDEX2M2 Breakout Board

    NVNTLabs/switch2-SDEX2M2

    Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

    2 parts542GPL-3.0
  • 2 layers59.3 × 36.6 mmExpansionBoardTemplate, the printed circuit board in 3D

    ExpansionBoardTemplate

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    2 parts459GPL-3.0
  • 2 layersAlpha.9mm.wire, the printed circuit board in 3D

    Alpha.9mm.wire

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    2 parts410
  • 2 layers26.7 × 64 mmGpu power, the printed circuit board in 3D

    Gpu power

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    2 parts397Apache-2.0

Questions

How big is the Svp adapter board PCB?

It measures 67.9 × 61.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Svp adapter board use?

2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Svp adapter board KiCad files?

From the jdesiloniz/svpdev repository on GitHub, at the commit this page was made from: the board is boards/svp-adapter-board/svp-adapter-board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Svp adapter board design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).