Skip to the content
2 layers22.9 × 20.3 mmRFM9x breakout, the printed circuit board in 3D

Breakout board PCB for HopeRF RFM9x series LoRa radio modules (RFM95, RFM96, RFM97, RFM98)

Size
22.9 × 20.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
15
Pads
37
Tracks, vias
92, 24
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
15 Apr 2018
Updated
9 May 2018

Overview

RFM9x breakout is an open-source printed circuit board by jdesbonnet, from the jdesbonnet/PCB_RFM9x_breakout repository on GitHub. It is a 2-layer board of 22.9 × 20.3 mm with 6 parts on 15 nets, routed with 92 tracks and 24 vias.

Its parts include 2 capacitors, 2 connectors and 1 IC. It belongs with the interfaces and adapters and radio and wireless boards of this library.

README

README.md

RFM9x radio module breakout board

This PCB allows an RFM9x (RFM95, RFM96, RFM97, RFM98) modules to be mounted on a breadboard.

I've rotated the RFM module 90 degrees to keep the width as small as possible. The width separating the pin headers is 0.8 inches (20.32mm) which is narrow enough to have at least one available contact point on each side.

3d rendering

As of 2018-04-18 this has been submitted for fabrication. I'll update this note when the board arrives and the design has been verified.

Arrived 2018-05-03. Tested 2018-05-08. Works, only problem is the tiny font of the pin labels. Increased font size by 50% (to 0.75mm) and resubmitted as version 1.0.1.

Parts

6
QtyValueFootprintReferences
2CCapacitors_SMD:C_0603_HandSolderingC1, C2
2Conn_01x08_MalePin_Headers:Pin_Header_Straight_1x08_Pitch2.54mmJ1, J2
1RFM92/95/96/97/98RF_Modules:Hopref_RFM9XW_SMDU2

The 5 most common of 6 parts.

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

How big is the RFM9x breakout PCB?

It measures 22.9 × 20.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the RFM9x breakout use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RFM9x breakout KiCad files?

From the jdesbonnet/PCB_RFM9x_breakout repository on GitHub, at the commit this page was made from: the board is RFM9x_breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the RFM9x breakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask jdesbonnet before reusing the design.