
Switch
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

PCB for an adapter board to facilitate USB connection to CSGShop M8T GNSS receiver. Used in conjunction with USB micro breakout board found on Ebay.
CSGShop M8T USB adapter is an open-source printed circuit board by jdesbonnet, from the jdesbonnet/PCB_CSGShop_M8T_USB_adapter repository on GitHub. It is a 2-layer board of 36.8 × 16.5 mm with 6 parts on 16 nets, routed with 48 tracks and 1 via.
It belongs with the interfaces and adapters boards of this library.
USB adapter for pin version of uBlox Neo-M8T available from CSGShop.
The pin header on the receiver breaks out USB D-/D+, 5V and GND. These can be routed directly to a USB mini or mico connector. For ease of construction I'm using a USB micro breakout board instead of soldering a USB micro connector directly on the board.
There are also headers for other pins including UART TX,RX (J4) and interrupt and timing pulse pins (J3).


| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3, J4 |
| 1 | Conn_01x05 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J2 |
| 1 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J1 NEO-M8T |
The 4 most common of 6 parts.

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.


Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

It measures 36.8 × 16.5 mm and has 2 copper layers, 1.6 mm thick.
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jdesbonnet/PCB_CSGShop_M8T_USB_adapter repository on GitHub, at the commit this page was made from: the board is CSGShop_M8T_USB_adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jdesbonnet before reusing the design.