8 layers34 × 34 mm
FMUv3-revG imported
yagamy4680/drone-study
AUAV-OpenSource/FMUv4-PixRacer is the open hardware design of PixHawk FMUv4. It uses STM32F427 and MPU6000. (github)
169 parts
4 layers55.9 × 55.9 mm
Assignment
jchaudhary21/PCB_Assignment- Size
- 55.9 × 55.9 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 105
- Nets
- 143
- Pads
- 495
- Tracks, vias
- 1,256, 138
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 21 May 2023
- Updated
- 7 Jun 2023
Overview
Assignment is an open-source printed circuit board by jchaudhary21, from the jchaudhary21/PCB_Assignment repository on GitHub. It is a 4-layer board of 55.9 × 55.9 mm with 105 parts on 143 nets, routed with 1,256 tracks and 138 vias.
It is built around the FM25V01-G, HMC5983 and MS5611-01BA03, with the MIC5233-3.3YS, 74LVC2GU04GW and MAX3051EKA among its other parts. Its parts include 41 resistors, 22 connectors, 11 capacitors, 10 ICs and 7 diodes. It belongs with the STM32 boards of this library.
Main components
8
FM25V01-G
SOIC8128Kb Serial 3V F-RAM MemoryInfineon TechnologiesUncategorisedHMC5983
LPCC-16(3x3)LPCC-16(3x3) 3D Magnetic Sensors ROHSHoneywell3D Magnetic Sensors
MS5611-01BA03
QFN-8(3x5)QFN-8(3x5) Pressure Sensors ROHSMEASPressure SensorsMIC5233-3.3YS
SOT-223-3-40℃~+125℃ 1 100mA 3.3V 30uA 36V 450mV@(100mA) Fixed Over Current Protection、Over Temperature Protection Positive SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
74LVC2GU04GW
SOT-363-40℃~+125℃ 1.2V、1.9V、2.2V、2.3V、3.8V 1.3ns@5.5V,50pF 1.65V~5.5V 100mV、300mV、400mV、450mV、550mV 2 4uA 74LVC SOT-363 Inverters ROHSMDDInverters
MAX3051EKA
UncategorisedMaxim Integrated Products
MPU-6000
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps 运动事件检测、同步与时间戳、过量程保护功能 QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometers
BSS123
SOT-23-55℃~+150℃ 1 N-channel 1.4V 1.4nC@10V 100V 170mA 22pF 2pF 3.5pF 680mW 6Ω@10V、10Ω@4.5V N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
Parts
105| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100E | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R8, R9, R10, R11, R12, R13, R14, R15, R18, R19, R20, R21 |
| 9 | R | Resistor_SMD:R_0402_1005Metric | R6, R7, R22, R32, R33, R34, R35, R36, R37 |
| 8 | Conn_01x04_Male | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J2, J3, J8, J9, J10, J11, J12, J18 |
| 8 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4, J5, J6, J7, J14, J15, J16, J17 |
| 7 | 10K | Resistor_SMD:R_0402_1005Metric | R23, R25, R27, R28, R29, R30, R31 |
| 7 | C | Capacitor_SMD:C_0402_1005Metric | 100n1, C17, C18, C20, C21, C22, C27 |
| 6 | 10k | Resistor_SMD:R_0402_1005Metric | R16, R17, R38, R39, R40, R41 |
| 5 | LED | LED_SMD:LED_0402_1005Metric | D1, D3, D4, D5, D6 |
| 3 | 100n | Capacitor_SMD:C_0402_1005Metric | C23, C26, C28 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3 |
| 3 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C4, C5, C6 |
| 3 | MIC5233-33 | eec:Microchip-SOT23-5LD-PL-1-0-0-MFG | U1, U2, U3 |
| 2 | C_Small | Capacitor_SMD:C_0402_1005Metric | C19, C24 |
| 2 | Dual_Diode | Diode_SMD:SOT65P205X100-3N | D2, D7 |
| 1 | 15K | Resistor_SMD:R_0402_1005Metric | R24 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R26 |
| 1 | 330E | Resistor_SMD:R_Array_Concave_4x0402 | RN1 |
| 1 | 500mA | Fuse:Fuse_0402_1005Metric | F1 |
| 1 | 560E | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 74LVC2GU04 | Module:SOT65P210X110-6N | U4 |
| 1 | BSS123 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x03_Male | Connector_JST:JST_GH_SM03B-GHS-TB_1x03-1MP_P1.25mm_Horizontal | J13 |
| 1 | Conn_01x06_Male | Connector_JST:JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal | J1 |
| 1 | Conn_01x08_Male | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J22 |
| 1 | Conn_02x06_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J21 |
| 1 | FM25V01 | Module:Cypress_Semiconductor-51-85066-0-H-IPC_A | U10 |
| 1 | HMC5983 | Module:HMC5983-TR | U6 |
| 1 | INDUCTOR (L_1) | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | MAX3051 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | MPU-6000 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U7 |
| 1 | MS5611-01BA | Package_LGA:LGA-8_3x5mm_P1.25mm | U8 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Molex_104031-0811 | J19 |
| 1 | Resonator | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | STM32F407VGTx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U5 |
| 1 | SW_MEC_5G | Button_Switch_SMD:SW_SPST_B3U-1000P-B | SW1 |
| 1 | Solder Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521_CircularHoles | J20 |
Questions
How big is the Assignment PCB?
It measures 55.9 × 55.9 mm and has 4 copper layers, 4.69 mm thick.
What parts does the Assignment use?
105 parts, built around the FM25V01-G, HMC5983, MS5611-01BA03 and MIC5233-3.3YS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Assignment KiCad files?
From the jchaudhary21/PCB_Assignment repository on GitHub, at the commit this page was made from: the board is Assignment/Assignment.kicad_pcb and its schematic Assignment/Assignment.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Assignment design in my own project?
Its repository states no licence, so its author keeps all rights: ask jchaudhary21 before reusing the design.
Similar boards
- 6 layers70 × 40.5 mm
PX4FMUv2.4
lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script
354 parts429GPL-2.0 - 4 layers47.5 × 62 mm
- 2 layers81 × 13 mm
RtSolder
juergen4mueller/rtSolder
As I have the full Weller power for business I wanted to have a cheap solution to work with Wellers RT solder tips at home.
44 parts - 4 layers109.9 × 79 mm
NX J401-Adapter
frc971/electrical
This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.
72 parts3Apache-2.0 - 2 layers50 × 50 mm
- 2 layers450 × 135 mm
- 4 layers125 × 50.1 mm
