2 layers24.4 × 24.4 mm
OSO SWAT B1
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
39 parts2.1k
2 layers114.3 × 96.8 mm
Flare
Jcam599/Flare136 Key Ergonomic Keyboard
- Size
- 114.3 × 96.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 38
- Pads
- 194
- Tracks, vias
- 358, 10
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Dec 2023
- Updated
- 22 Dec 2023
Overview
Flare is an open-source printed circuit board by Jcam599, from the Jcam599/Flare repository on GitHub. It is a 2-layer board of 114.3 × 96.8 mm with 39 parts on 38 nets, routed with 358 tracks and 10 vias.
Its parts include 18 diodes and 3 ICs. It belongs with the keyboards and input boards and the SAM D and SAM boards of this library.
README
README.mdKeyboard : Flare
Keys : 36
Micro Controller : Xiao rp2040
Split : Yes
Connection : TRRS
Communication : UART
Details : This keyboard was made for myself so the stagger matches my finger length, but I have had a couple people try it with good results so if you have short to medium fingers it might fit for you as well.
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | D_Small | Keebio:Diode | D1, D2, D3, D4, D5, D6, D7, D10, D11, D12, D13, D14, D15, D16, D17, D18 +2 |
| 18 | MX-NoLED | keySwitches:SW_MX_reversible | MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18 +2 |
| 2 | TRRS | Keebio:TRRS-PJ-320D | U2, U3 |
| 1 | SeeeduinoXIAO | seeed:Seeeduino XIAO-MOUDLE14P-2.54-21X17.8MM | U1 |
Questions
How big is the Flare PCB?
It measures 114.3 × 96.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Flare use?
39 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flare KiCad files?
From the Jcam599/Flare repository on GitHub, at the commit this page was made from: the board is Flare/Flare.kicad_pcb and its schematic Flare/Flare.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flare design in my own project?
Its repository states no licence, so its author keeps all rights: ask Jcam599 before reusing the design.
Similar boards
- 2 layers100 × 33.5 mm
Breakout 48pin 174917-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
39 parts1.2k - 2 layers33 × 26 mm
VL53L1x pwm
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
39 parts915 - 2 layers43.4 × 18.8 mm
Usb sniffer lite
ataradov/usb-sniffer-lite
A simple USB sniffer based on Raspberry Pi RP2040
39 parts706BSD-3-Clause - 2 layers40 × 20 mm
ESP8266
windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器
39 parts690MIT - 2 layers100 × 70.3 mm
- 2 layers81.3 × 53.3 mm
RGB LED 1.4
lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script
39 parts429GPL-2.0 - 2 layers65.7 × 44.8 mm
