2 layers80.6 × 92.7 mm
DigitalIO Rev1
jayvalentine/modular-z80
Schematics and documentation for my modular Z80 machine, inspired by RC2014
31 partsGPL-3.0
2 layers217.2 × 109.2 mm
MainBoard Rev1
jayvalentine/modular-z80Schematics and documentation for my modular Z80 machine, inspired by RC2014
- Size
- 217.2 × 109.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 51
- Pads
- 384
- Tracks, vias
- 129, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 Nov 2020
- Updated
- 24 Sep 2023
Overview
MainBoard Rev1 is an open-source printed circuit board by jayvalentine, from the jayvalentine/modular-z80 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 217.2 × 109.2 mm with 32 parts on 51 nets, routed with 129 tracks and 0 vias.
It is built around the 74HC04D. Its parts include 12 capacitors, 9 connectors, 5 resistors, 2 ICs and 2 diodes. It belongs with the computers and single-board computers and retro computing and games boards of this library.
Main components
1README
README.mdModular Z80
This repository contains schematics, PCB layouts, and documentation for my modular Z80 computer. All schematics and layouts are done using Kicad.
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C2, C5, C6, C7, C8, C9, C10, C11, C12 |
| 8 | Conn_01x40_Female | Connector_PinSocket_2.54mm:PinSocket_1x40_P2.54mm_Vertical | J1, J3, J4, J5, J6, J7, J8, J9 |
| 2 | 22p | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C3, C4 |
| 2 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 220n | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1 |
| 1 | 74HC04 | Package_DIP:DIP-14_W7.62mm_Socket | U1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J2 |
| 1 | Crystal 3.6864MHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | LED_GREEN | LED_THT:LED_D3.0mm | D2 |
| 1 | LED_RED | LED_THT:LED_D3.0mm | D1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | SW_DIP_x01 | Button_Switch_THT:SW_Tactile_Straight_KSA0Axx1LFTR | SW1 |
More from jayvalentine/modular-z80
11- 2 layers50.8 × 104.1 mm
Timer RTC
jayvalentine/modular-z80
Schematics and documentation for my modular Z80 machine, inspired by RC2014
20 partsGPL-3.0 - 2 layers50.8 × 104.1 mm
Banked RAM Higher
jayvalentine/modular-z80
Schematics and documentation for my modular Z80 machine, inspired by RC2014
19 partsGPL-3.0 - 2 layers50.8 × 104.1 mm
Banked ROM
jayvalentine/modular-z80
Schematics and documentation for my modular Z80 machine, inspired by RC2014
19 partsGPL-3.0 - 2 layers50.8 × 104.1 mm
CFCard
jayvalentine/modular-z80
Schematics and documentation for my modular Z80 machine, inspired by RC2014
12 partsGPL-3.0 - 2 layers50.8 × 104.1 mm
Serial 6850 Rev1
jayvalentine/modular-z80
Schematics and documentation for my modular Z80 machine, inspired by RC2014
9 partsGPL-3.0 - 2 layers50.8 × 104.1 mm
Z80 Rev2
jayvalentine/modular-z80
Schematics and documentation for my modular Z80 machine, inspired by RC2014
8 partsGPL-3.0 - 2 layers37.5 × 92.1 mm
Z80 Rev1
jayvalentine/modular-z80
Schematics and documentation for my modular Z80 machine, inspired by RC2014
6 partsGPL-3.0 - 2 layers
8KROM Lower Rev1
jayvalentine/modular-z80
Schematics and documentation for my modular Z80 machine, inspired by RC2014
4 partsGPL-3.0 - 2 layers50.8 × 104.1 mm
8KROM Lower Rev2
jayvalentine/modular-z80
Schematics and documentation for my modular Z80 machine, inspired by RC2014
4 partsGPL-3.0 - 2 layers36.2 × 95.3 mm
32KRAM Higher Rev1
jayvalentine/modular-z80
Schematics and documentation for my modular Z80 machine, inspired by RC2014
4 partsGPL-3.0
Similar boards
- 2 layers43.9 × 27.7 mm
- 2 layers191.8 × 121.3 mm
8-Bit CPU 32k
slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed
109 parts184 - 2 layers47 × 39 mm
Qrss clock tx
swharden/AVR-projects
A collection of standalone AVR projects written in C
32 parts184MIT - 2 layers312 × 140 mm
- 2 layers138 × 96.9 mm
- 2 layers304.8 × 165.1 mm
Comix-35
schlae/comix-35
The COMIX-35 is an improved clone of the COMX-35 1802 home computer
173 parts138 - 2 layers306.1 × 130.2 mm
8-Bit CPU 32k
slu4coder/Minimal-64-Home-Computer
Legacy: Full TTL-only home computer with VGA and PS/2 and twice the processing power of a Commodore 64
132 parts94 - 2 layers70 × 85 mm
Questions
How big is the MainBoard Rev1 PCB?
It measures 217.2 × 109.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MainBoard Rev1 use?
32 parts, built around the 74HC04D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MainBoard Rev1 KiCad files?
From the jayvalentine/modular-z80 repository on GitHub, at the commit this page was made from: the board is MainBoard_Rev1/MainBoard_Rev1.kicad_pcb and its schematic Banked_RAM_Higher/Banked_RAM_Higher.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MainBoard Rev1 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).