Skip to the content
2 layers31.8 × 35.3 mmAudioBox, the printed circuit board in 3D

Then, I thought, what if I created a device that is just a button

Size
31.8 × 35.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
26
Pads
45
Tracks, vias
55, 2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
13 Jun 2026
Updated
15 Jun 2026

Overview

AudioBox is an open-source printed circuit board by jay-lchicken, from the jay-lchicken/AudioBox repository on GitHub. It is a 2-layer board of 31.8 × 35.3 mm with 6 parts on 26 nets, routed with 55 tracks and 2 vias.

It is built around the TPA2005D1DGNR. Its parts include 2 capacitors, 2 ICs, 1 connector and 1 switch. It belongs with the RP2040 boards of this library.

Main components

1

README

README.md

AudioBox

Introduction

I have always wanted to be able to play sound effects from an actual device where I can just smack the button and the effect will play without having to use my phone.

Then, I thought, what if I created a device that is just a button

From there, I thought how can I make this project unique.

This project is powered by a Seeed Xiao RP2040 because it is affordable and has a large flash size. It is tiny too.

Next, I added 3W 8Ω speakers that can go up to 110DB!! That is to ensure that the sound effect can be heard even in a loudroom

Instead of using traditional buttons, I decided to go with limit switches so that the user can experience the satisfying click sound when the button is pressed

To reduce static noise, I added a decoupling and a bypass capacitor to the circuit. This will help to ensure that there is no static noise

Images

image 1 image 2 image 3 image 4

BOM

Bill of Materials (BOM)

ItemQtyUnit Cost (USD)Total Cost (USD)
PCB + PCBA137.0237.02
Speaker12.302.30
SS-5GL11.601.60
Seeed XIAO RP204013.713.71
Total44.63

Future Plans

I plan on creating a website once the hardware is done to talk to the RP2040, to download and install new audio

This makes it a well-polished product, rather than having to open up the code just to change the audio

If not for this feature, I would have just used a normal pcb audio player and no need for the rp2040

Parts

6
QtyValueFootprintReferences
10.1uFCapacitor_SMD:C_0402_1005MetricC2
110uFCapacitor_SMD:C_0805_2012MetricC1
1Conn_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_HorizontalJ1
1SW_PushTerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_HorizontalSW1
1TPA2005D1DGNRTPA2005D1DGNR:SOP65P490X110-9NU2
1XIAO-RP2040-DIPSeeed:XIAO-RP2040-DIPU1

Similar boards

  • 4 layers100 × 100 mmProgrammer, the printed circuit board in 3D

    Programmer

    FrankBuss/bloxorz

    105 parts12
  • 2 layers88 × 120 mmPocket synth, the printed circuit board in 3D

    Pocket synth

    ykstudio3695-boop/CHORDION

    オリジナルのポケットサイズシンセサイザーを開発するプロジェクト。

    95 parts1
  • 4 layers114.3 × 108 mmPellet, the printed circuit board in 3D

    Pellet

    Mouse-GYM/auto-trainer-hardware

    Repository for hardware, firmware, and software related to the Mouse-GYM modules

    202 parts
  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0

Questions

How big is the AudioBox PCB?

It measures 31.8 × 35.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the AudioBox use?

6 parts, built around the TPA2005D1DGNR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AudioBox KiCad files?

From the jay-lchicken/AudioBox repository on GitHub, at the commit this page was made from: the board is Untitled.kicad_pcb and its schematic Untitled.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the AudioBox design in my own project?

Its repository states no licence, so its author keeps all rights: ask jay-lchicken before reusing the design.