6 layers100 × 80 mm
Checked
rjwalters/kicad-tools
Standalone Python tools for parsing and manipulating KiCad schematic and PCB files
43 parts73MIT
2 layers51.4 × 61 mm
Dmgcart
jawsper/dmgcart1DMGcart: An STM32F429 based Game Boy flashcart
- Size
- 51.4 × 61 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 65
- Nets
- 145
- Pads
- 401
- Tracks, vias
- 1,527, 343
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Mar 2020
- Updated
- 15 Mar 2020
Overview
Dmgcart is an open-source printed circuit board by jawsper, from the jawsper/dmgcart repository on GitHub, published under the MIT licence. It is a 2-layer board of 51.4 × 61 mm with 65 parts on 145 nets, routed with 1,527 tracks and 343 vias.
It is built around the STM32F429ZIT6, AMS1117-3.3 and FXMA108BQX, with the IS42S16400J-7TL among its other parts. Its parts include 31 capacitors, 7 resistors, 6 diodes, 4 ICs and 4 connectors. It belongs with the STM32 boards of this library.
Main components
4
STM32F429ZIT6
LQFP-144(20x20)-40℃~+85℃ 1.8V~3.6V 114 12bit 12bit 180MHz 256KB 2MB 32 Bit ARM Cortex-M4 Built-in FLASH LQFP-144(20x20) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
FXMA108BQX
DQFN-20-EP(2.5x4.5)-40℃~+85℃ 1 1.65V~5.5V 1.65V~5.5V 100Mbps 8 Auto Direction Detection、Power-Off Protection Bidirectional Tri-State DQFN-20-EP(2.5x4.5) Translators, Level Shifters ROHSonsemiTranslators, Level Shifters
IS42S16400J-7TL
TSOPII-54-10.2mm0℃~+70℃ 143MHz 3V~3.6V 64Mbit 70mA High-speed clock synchronization、Auto precharge、Automatic column address generation、Auto refresh TSOPII-54-10.2mm SDRAM ROHSISSISDRAM
README
README.mddmgcart
DMGcart: STM32F429 based Game Boy flashcart
These are the hardware design files for the DMGcart.
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 100n | Capacitor_SMD:C_0603_1608Metric | C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25 +7 |
| 4 | 470R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R5, R6 |
| 2 | 18p | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 3pF | Capacitor_SMD:C_0402_1005Metric | C30, C31 |
| 2 | D_Schottky | Diode_SMD:D_SOD-123 | D5, D6 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C28 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 32.768 kHz | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm | Y2 |
| 1 | 47346-0001 | Connector_USB:USB_Micro-B_Molex_47346-0001 | J2 |
| 1 | 47u | Capacitor_SMD:C_0805_2012Metric | C29 |
| 1 | 8 MHz | Crystal:Crystal_SMD_0603-2Pin_6.0x3.5mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | BOOT0 | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | BOOT1 | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW3 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J4 |
| 1 | FXMA108BQX | Package_DFN_QFN:WQFN-20-1EP_2.5x4.5mm_P0.5mm_EP1x2.9mm | U3 |
| 1 | GameBoy_Cartridge | Gekkio_Connector_PCBEdge:GameBoy_Cartridge_1x32_P1.50mm_Edge | J1 |
| 1 | IS42S16400J-7TL | Package_SO:TSOP-II-54_22.2x10.16mm_P0.8mm | U2 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Hirose_DM3D-SF | J3 |
| 1 | MountingHole | Gekkio_MountingHole:MountingHole_7.2mm | H1 |
| 1 | MountingHole | Gekkio_MountingHole:MountingHole_2.3mm | H2 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW2 |
| 1 | STM32F429ZIT6 | Package_QFP:LQFP-144_20x20mm_P0.5mm | U1 |
| 1 | SW3_BOOT1-PA8 | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
The 63 most common of 65 parts.
Questions
How big is the Dmgcart PCB?
It measures 51.4 × 61 mm and has 2 copper layers, 0.8 mm thick.
What parts does the Dmgcart use?
65 parts, built around the STM32F429ZIT6, AMS1117-3.3, FXMA108BQX and IS42S16400J-7TL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dmgcart KiCad files?
From the jawsper/dmgcart repository on GitHub, at the commit this page was made from: the board is dmgcart.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dmgcart design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 6 layers52 × 52 mm
STM32 Dev Board
MarvinBrth/Dev_Board_STM32F769
Comprehensive STM32F796 dev board tailored for versatile applications. Features dual OTG USB-C interfaces (FS and HS), high-speed DRAM, DSI and EMMC storage.
139 parts1 - 4 layers72.9 × 61.3 mm
Graphics card rev-2
ShaneTWilliams/worlds-worst-graphics-card
Custom HDMI transmitter PCB with 480 MHz STM32H7 microcontroller
131 parts18MIT - 4 layers77.5 × 52.3 mm
X16
jamesratzlaff/Serdaco-X16
I wanted to make a case for the Serdaco DreamBlaster X16. Since I rarely do anything half-way when it comes to visualization, I busted out the datasheets and got to work. This is not a functionally accurate PCB.
136 parts - 4 layers140 × 95 mm
- 8 layers100 × 100 mm
- 6 layers70 × 61.8 mm
- 4 layers27.9 × 63.9 mm
Tiny4FSKGeneralShield
mpkendall/Tiny4FSK-Ecosystem
Set of expansion boards, sensor breakouts, and additional modules to operate with the Tiny4FSK tracking system.
35 parts3GPL-3.0