

Keyboard left
Board edge fillet plugin used: https://github.com/tywtyw2002/FilletEdge
- Size
- 193.5 × 133.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 232
- Nets
- 189
- Pads
- 2,096
- Tracks, vias
- 303, 20
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 26 Jun 2023
- Updated
- 2 Aug 2023
Overview
Keyboard left is an open-source printed circuit board by jasonlaguidice, from the jasonlaguidice/TKL-Split-Keyboard repository on GitHub. It is a 2-layer board of 193.5 × 133.9 mm with 232 parts on 189 nets, routed with 303 tracks and 20 vias.
It is built around the LMV321, W25Q32JVSSIQ and AZC199-04S, with the TPS2553DBVR-1, 74HC595 and MB85RS64A among its other parts. Its parts include 88 diodes, 36 switches, 30 resistors, 28 capacitors and 10 ICs. It belongs with the keyboards and input boards and the STM32 boards of this library.
Main components
9LMV321
SOT-23-5L-2.75V~-1.25V、1.25V~2.75V 0℃~+70℃ 1 10pA 10pA 1MHz 2.1V~5.5V 20mA 20nV/√Hz@10kHz 520V/ms 60uA 70dB 800uV Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5L Operational Amplifier ROHSJiangsu Changjing Electronics Technology (CJ)Operational AmplifierW25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHAZC199-04S
SOT-23-6-55℃~+125℃ 0.3pF、0.8pF 11V、15V、18V 300W@8/20us 4.7A@8/20us 5 5V 6V 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Unidirectional SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)TPS2553DBVR-1
SOT-23-6-40℃~+150℃ 1 1.5A 2.5V~6.5V 85mΩ Active High High Side Switch 过压保护、软启动、欠压锁定、反向电压保护、集成电荷泵、Overcurrent Protection、Over temperature protection、锁存保护、Short-Circuit Protection、反向电流阻断 SOT-23-6 Power Distribution Switches ROHSTexas InstrumentsPower Distribution Switches74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift RegistersMB85RS64A
SO8-150milSO8-150mil New Arrivals ROHSFUJITSUUncategorisedAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsSMF5.0CA
SOD-123FLESD And Surge Protection (TVS/ESD)hongjiachengMMUN2233LT1G
SOT-231 NPN (Pre-Biased) 1.3V@5mA,0.3V 100mA 12 200mW 250MHz 300mV@5mA,0.25mA 500mV@100uA,5V 50V 6.11kΩ 80 NPN SOT-23 Digital Transistors ROHSTECH PUBLICDigital Transistors
README
README.mdTKL-Split-Keyboard
Forked from Djinn keyboard
Board edge fillet plugin used: https://github.com/tywtyw2002/FilletEdge
To-do list:
- Change USB-C connector footprints to hand-solderable version (update BOM part as well)
Parts
232| Qty | Value | Footprint | References |
|---|---|---|---|
| 47 | SK6812 Mini-E | Keebio-Parts.pretty-master:SK6812-MINI-E | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED22, LED23, LED24 +31 |
| 39 | 1N4148 | Diode_SMD:D_SOD-123F | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +23 |
| 29 | SW_Push | MX_Only:MXOnly-1U-Hotswap-Antishear | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW16, SW17, SW18, SW19, SW20, SW22, SW23, SW24, SW25 +13 |
| 16 | 9.1k | reversible-kicad-footprints:R-0805_2012Metric | R1, R3, R4, R5, R8, R10, R11, R13, R14, R15, R21, R24, R26, R27, R29, R30 |
| 15 | 100n | reversible-kicad-footprints:C-0805_2012Metric | C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27 |
| 13 | 4A/0805 | reversible-kicad-footprints:L-0805_2012Metric | FB1, FB2, FB3, FB4, FB5, FB6, FB7, FB8, FB9, FB10, FB11, FB12, FB13 |
| 11 | 68k | reversible-kicad-footprints:R-0805_2012Metric | R2, R6, R9, R16, R17, R18, R19, R20, R22, R31, R32 |
| 11 | Drill Mountpoint | DjinnFootprints:MountingHole_3.2mm_M3_Pad_Via | DRILL1, DRILL2, DRILL3, DRILL4, DRILL5, DRILL6, DRILL7, DRILL8, DRILL9, DRILL10, DRILL11 |
| 9 | 100u | reversible-kicad-footprints:CP_6032 | C1, C2, C3, C4, C5, C6, C9, C11, C28 |
| 4 | 4.7u | reversible-kicad-footprints:C-0805_2012Metric | C7, C8, C10, C12 |
| 4 | AO3401A | reversible-kicad-footprints:SOT-23-3 | Q1, Q2, Q3, Q7 |
| 3 | 120 | reversible-kicad-footprints:R-0805_2012Metric | R7, R12, R28 |
| 3 | SW_Push | MX_Only:MXOnly-1.25U-Hotswap | SW33, SW34, SW35 |
| 2 | 2N7002 | reversible-kicad-footprints:SOT-23-3 | Q4, Q5 |
| 2 | AZC199-04S | reversible-kicad-footprints:SOT-23-6 | U6, U7 |
| 2 | SMF5.0CA | reversible-kicad-footprints:D_SOD-123 | D40, D41 |
| 2 | TPS2553DBVR-1 | reversible-kicad-footprints:SOT-23-6 | U4, U8 |
| 2 | USB-C-2.0 | Type-C.pretty-master:HRO-TYPE-C-31-M-12-HandSoldering | SPLIT1, USB1 |
| 1 | 1.5A 1206 Polyfuse | reversible-kicad-footprints:Fuse_1206_3216Metric | F2 |
| 1 | 3.0A 1206 Polyfuse | reversible-kicad-footprints:Fuse_1206_3216Metric | F1 |
| 1 | 74HC595 | Package_DIP:DIP-16_W10.16mm | U11 |
| 1 | AP2127K-3.3 | reversible-kicad-footprints:SOT-23-5 | U3 |
| 1 | DFU | reversible-kicad-footprints:PushButton_4.5mm | RESET1 |
| 1 | LCD-ILI9341-2.2in | DjinnFootprints:LCD-ILI9341-2.2in | LCD1 |
| 1 | LMV321 | reversible-kicad-footprints:SOT-23-5 | U5 |
| 1 | MB85RS64 | reversible-kicad-footprints:SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | MMUN2133LT1G | reversible-kicad-footprints:SOT-23-3 | Q6 |
| 1 | MMUN2233LT1G | reversible-kicad-footprints:SOT-23-3 | Q8 |
| 1 | Rotary_Encoder_Switch | reversible-kicad-footprints:EC11_Switch | ENC1 |
| 1 | ST-Link Clone (Optional) | DjinnFootprints:STLink_SideSocket | J1 |
| 1 | STM32G474RETx | DjinnFootprints:STM32G474RETx | U1 |
| 1 | SW_Push | MX_Only:MXOnly-1.75U-Hotswap | SW21 |
| 1 | SW_Push | MX_Only:MXOnly-2.25U-Hotswap | SW27 |
| 1 | SW_Push | MX_Only:MXOnly-3U-Hotswap-ReversedStabilizers | SW36 |
| 1 | SW_Push | MX_Only:MXOnly-1.5U-Hotswap | SW15 |
| 1 | W25Q32JVSSIQ | reversible-kicad-footprints:SOIC-8_5.23x5.23mm_P1.27mm | U10 |
Similar boards
- 2 layers192.2 × 150.5 mm

- 2 layers90 × 29 mm

- 2 layers164 × 148.9 mm

- 2 layers21.6 × 32.4 mm

- 2 layers457.4 × 132 mm

SP110Duo
printsmith/keyboards
Custom keyboard featuring a modified Southpaw 1800 layout with 2 nav clusters, LCD display and rotary encoders.
309 parts - 2 layers183.9 × 155.8 mm

Hermod left
modern-hobbyist/aesir
Collection of KiCad PCB designs for custom keyboards, including full-sized and split ergonomic layouts with STM32F072CBT6 microcontrollers.
198 parts27 - 4 layers93.3 × 58.9 mm

LTELink
UBCOAerospaceClub/LTELink
A base board for the Raxda CM3 to stream live video and telemetry through LTE
107 parts1CERN-OHL-W-2.0 - 4 layers165 × 125 mm

Questions
How big is the Keyboard left PCB?
It measures 193.5 × 133.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Keyboard left use?
232 parts, built around the LMV321, W25Q32JVSSIQ, AZC199-04S and TPS2553DBVR-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keyboard left KiCad files?
From the jasonlaguidice/TKL-Split-Keyboard repository on GitHub, at the commit this page was made from: the board is keyboard-left.kicad_pcb and its schematic keyboard-left.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keyboard left design in my own project?
Its repository states no licence, so its author keeps all rights: ask jasonlaguidice before reusing the design.